Konica Minolta Z20 instruction manual Slide Show, Slide show Enter

DiMAGE_Z20_English_B412.qxd 04.12.27 16:57 Page 80

SLIDE SHOW

Section 2 of the playback menu controls the slide-show function. This function automatically displays all still images and movie clips on the memory card or in the camera’s internal memory in order. The menu has the following options:

Slide show Enter	To start the slide-show presentation. Highlight “Enter” and
	press the central button of the controller to start the slide
	show.
All	To select all the images on the memory card or in the internal
frames	memory to be displayed in the slide-show presentation.
	To select specific images to be displayed in the slide-show
	presentation. When this setting is chosen, the frame-selection
Playback	screen is displayed. Use the left/right keys of the controller to
	highlight the image to be included in the presentation.
Marked
	Pressing the up key will mark the image with a check
frames	indicator. To deselect a marked image, highlight it with the
	yellow border and press the down key; the check disappears.
	Continue until all the images have been edited. Press the
	controller to set the marked frames, or press the menu button
	to cancel the operation and return to the playback menu.

Duration 1 - 60s.

Repeat On / Off

To select the period each still image is displayed during the slide show.

Selecting “On” causes the slide show to repeat until it is canceled using the menu button. “Off” ends the slide show presentation and returns to the playback menu when all the images have been displayed once.

80ADVANCED PLAYBACK