Emerson FG-110 manual Function Block Application

Page 65

Softing Linking Device –

Manual for Configuration, Installation and Maintenance

FF-CONF Configure your plant

Device assignment is a time consuming action. During assignment, the device within the network configuration view gets a yellow bullet. The physical device within Network Livelist disappears if the PD tag and/or the node address have changed. As soon as the assignment is accomplished, the physical device is displayed again and the bullet on the configured device turns green.

A prerequisite for building and downloading code is that the configured device matches the physical device displayed in the livelist. Necessary adaptions to the configuration can be done both in <Network Configuration> and in <Network Livelist>, depending on your individual requirements.

If you change the user tag or the NodeID of an H1 device in the Livelist, the H1 device uses for a short time one of the reserved numbers 248 to 251 and also vanishes and reappears. After about a minute the H1 device appears with its new user tag and/or its new NodeID. If your attempt is not successful try it again.

5.8 Function Block Application

The Function Block Application defines the communication between input and output parameters of function blocks. Depending on the installation’s topology direct communication between the H1 Devices will be configured. If necessary the signal is republished by the linking device(s). The blocks are defined by the imported .cff files.

i

The communication does not take place when configured, but after loading the

project to the device.

Function block applications can be organized in groups and applications. A project contains one or more groups. A group contains one or more applications. By default a DefaultGroup and a DefaultApplication are created. The data can be shown by selecting the block in the block view as well as clicking on the desired block in the Function Block application.

There are two ways to connect blocks in the Function Block application:

●To use a block instance of a configured device,

●to instantiate a block type.

5.8.1New groups and applications (beside the Default Group and Application)

To simplify the overview in big installations or in the case of different requirements it is useful to create more than one group or application.

With the icons above you can create new groups and applications, delete or copy and paste applications. The applications names can be given individually and different cycle times can be defined.

!The cycle time has to fit the macro cycle time defined on the H1 link

V1.31

page 65 of 85

Page 64 Page 66
Image 65
Page 64 Page 66
Contents Softing Linking Device V1.31 Table of Contents FF-CONF Configure your plant Configuration ConfigurationSettingsTrace Log List and properties view Glossary Scope of Delivery Safety NotesIntended Use System RequirementsLED Block Meaning Overview Hardware FG-110 FFEthernet Port Power SupplyPin # Signal Description Pin MDI Signal Pinout Standard Ethernet CableModbus Modbus serial RS232 / RS485FF H1 fieldbus connection FIM-110 FF The pre-wired Installation of the FG-110 FFInstallation Overview PC IP address Configuration Linking Device IP address ConfigurationHomepage of the Linking Device FG-110 FF Linking Device FG-110 FF Internal Web ServerInformationVersion InformationInformationContact InformationManual DiagnosticsSystem DiagnosticsDiagnosticsFieldbus DiagnosticsInternet ProtocolDiagnosticsAdvancedFieldbus Statistics DiagnosticsAdvancedDiagnosticsAdvancedModbus Statistics DiagnosticsAdvancedModbus StatisticsTCP Monitor Point Pages MonitorConfigurationSettings ConfigurationSettingsGeneral Settings ConfigurationPage 1 Configure the Internet Protocol Read Current Values ConfigurationSettingsLD Settings3 Change user accounts new Passwords ConfigurationSystem MaintenanceFirmware ConfigurationSystem MaintenanceSystem Backup ConfigurationSystem MaintenanceTime ConfigurationPage OptionsPoint Pages ConfigurationPage OptionsConfigurationPage OptionsPoint Columns ConfigurationPage OptionsHome ConfigurationFieldbusBlocks ConfigurationFieldbus ConfigurationFieldbusDevicesConfigurationFieldbusH1 Parameter ConfigurationFieldbusHSE ConfigurationModbusCommunication ConfigurationModbusImport/Export 18 Import/Export of the Modbus Configuration Screen FF-CONF and general descriptions FF-CONF Configure your plantEdit Main menuProject Check All BuildDownload Project DownloadDownload Device Project Settings SettingsTool Settings Help Network ConfigurationToolBar Icons you can use while working Main viewNetwork Livelist Function Block ApplicationParameter View Schedule ViewDevice Types List and properties viewBlock Types Devices Properties Floating windows Filtering the contentsGeneral Information HSE Subnet Using the buttons of the objectsHSE Device H1 LinkStart FF-CONF Using the context menuHSE and H1 device types Managing the Device type libraryRemove a Device Type Create a New Project Project handlingDelete Project Configure PC and Subnet Network configuration2 Add an HSE Device 5 Add an H1 Link to the HSE Device Add H1 Device Field Device to an H1 Link Display the Network Livelist Network LivelistSet the online status 4 Pull down the Network Livelist Page Function Block Application Devices first approach Configure the Function Block applicationChange tag names Configure parameters Change Block Tags 7 Rename blocks 8 Choose a block to see or edit parameters Page 10 Add a block type Handling Host devices Symptom Cause Recommended Actions Error handling and troubleshootingMODE.ACTUAL=OOS Returned Value ActionParameter Description Bus parameters relevant for H1 devicesRange Bus parameters relevant for H1 Links Parameter Description Range/ Restriction Default valuePage Term Definitions Comment Other term GlossaryTerm Definitions Networking definitionsFieldbus definitions Page Marking of equipment type label Preface General Information on Explosion ProtektionGeneral requirements Commissioning, installationUse Maintenance and repairDisposal

FG-110 specifications

The Emerson FG-110 is a versatile and advanced fire and gas detection system designed for industrial applications. With increasing safety and regulatory standards in industries such as oil and gas, chemical processing, and manufacturing, the FG-110 provides a reliable solution for detecting early signs of fire and gas leaks, ensuring the protection of personnel, assets, and the environment.

One of the key features of the Emerson FG-110 is its robust detection capabilities. It is equipped with a variety of sensors for detecting different types of gases, including combustible gases, toxic gases, and oxygen levels. This multi-sensitivity approach allows for enhanced safety in environments where various hazardous substances may be present. The sensors are designed for high accuracy and fast response times, ensuring that any potential issues are detected swiftly before they escalate into more serious incidents.

The Emerson FG-110 utilizes advanced signal processing technologies. This includes sophisticated algorithms that filter out false alarms, providing operators and safety personnel with reliable notifications. The system's ability to distinguish between genuine threats and harmless environmental changes is crucial in high-stakes environments where false alarms can lead to unnecessary disruptions and safety concerns.

One of the standout characteristics of the FG-110 is its modular design, allowing for flexible configurations tailored to specific site requirements. Users can easily integrate additional sensors or modules as their needs evolve or as they expand their facility. This scalability makes it an ideal choice for both new installations and retrofitting existing systems.

In terms of communications, the Emerson FG-110 supports various protocols, enabling seamless integration with existing safety management systems and centralized control rooms. This connectivity enhances real-time monitoring and data analysis, helping safety teams make informed decisions efficiently.

Built with durability in mind, the Emerson FG-110 meets rigorous industrial standards. Its rugged casing and resistance to harsh environmental conditions ensure long-lasting performance, which is essential for operations in environments exposed to extreme temperatures, vibrations, or corrosive substances.

In summary, the Emerson FG-110 fire and gas detection system combines advanced sensor technologies, reliable performance, and modular design to deliver a comprehensive safety solution for industrial applications. With its focus on accuracy, flexibility, and integration, the FG-110 stands out as a robust tool in maintaining safety and preventing hazards in complex industrial environments.
Top Page Image Contents