Softing Linking Device –
Manual for Configuration, Installation and Maintenance
Linking Device
<Change Settings and Reboot>
When you click the button <Change Settings and Reboot> the web site shuts down and the system reboots.
The input values will be checked for consistency. If the input values are not consistent, the Linking Device will propose consistent values. You can use the proposed values by clicking <yes> or keep the values you entered by selecting <no>.
The Linking Device will be rebooted after a few seconds and the new values will be accepted.
If you change the IP address of the Linking Device, the IP connection between PC and Linking Device will be lost. You have to use the new IP address to
If all parameters are correct, the new values are accepted and displayed.
<Read Current Values>
If you changed some of the parameters and you are not sure of your changes, click the button <Read Current Values>. Input fields which are already filled are shown again.
i
Do not access the web server of the Linking Device before the NEW NETWORK SETTINGS or ERROR OCCURED message is displayed in the browser window. If you do so, you will have to clear the cache of your web browser after the boot process has finished, and then re- establish a connection to the web server of the Linking Device.
4.5.1.3 <Configuration><Settings><LD Settings>
Fig
Each Linking device gets a unique
The Webpage
page 26 of 85 | V1.3 |