Sample Configurations
Sample RAID Configuration
Configuring the Mylex RAID Array Group
Parallel Port | [Enabled as LPT1...] |
Serial Port 1 | [Enabled as Serial 1...] |
Serial Port 2 | [Enabled as Serial 2...] |
System Setting |
|
Special System Ports | [Enabled] |
EISA Reserved Device | [Enabled] |
*Note: If a PCI adapter is configured in the system, change Disabled to the IRQ level for the PCI adapter installed in the slot.
4.Exit and save the configuration.
Prior to installing the operating system, it is necessary to use the Mylex Disk Array Configuration Utility to configure the Array Group.
Refer to the Mylex Disk Array Controller User’s Manual for detailed instructions.
NCR S10 Desktop Server User Guide |
