NCR S10 manual Installing a 5.25-inch Peripheral Drive

Installing a 5.25-inch Peripheral Drive

Figure 2-10

Removing the Disk Drive Housing

Installing the System

Installing Drives

To install a 5.25-inch peripheral drive, follow these steps:

1.Unplug all cables connected to the drives.

2.Locate the two holding tabs that attach the drive housing to the system unit and push both tabs outward, one at a time, to release the drive housing. See Figure 2-10.

3.Carefully lift up the drive housing.

4.Detach the 3.5-inch drive frame from the 5.25-inch disk drive housing by removing the two screws securing the metal frames.

NCR S10 Desktop Server User Guide 2-21