Using the System Utilities
Using the EISA Configuration Utility
Configuring an ISA
Option Without a CFG
File
If your system has less than 128 MB of system memory, subtract 64 MB from the amount of total system memory and enter that value in this field. For example, if your system has 96 MB of total system memory, subtract 64 MB from 96 MB to get 32 MB (96 MB - 64 MB = 32 MB), and enter 32M in the size field.
13.After entering the appropriate selection in the size field, press [Enter]. You are returned to the system baseboard configuration screen.
14.System memory is now correctly configured. Exit from the EISA Configuration Utility. Make sure to save the system configuration.
To configure an ISA option without a CFG file, follow these steps:
1.Run the EISA Configuration Utility.
2.If you have a printer, print the resources used by the entire system by choosing System, then Print.
If you do not have a printer, select View, then Resources, and write down the resources used by the system.
3.Set the appropriate jumpers or switches on the ISA board. make sure that the board does not conflict with the system resources currently in use.
NCR S10 Desktop Server User Guide |
