NCR S10 manual VGA Palette Snoop On Board Scsi, Boot Device

Using the BIOS Setup Utility

PCI System Configuration

VGA Palette Snoop

On Board SCSI

PCI devices support the “palette snooping” technique that enables the device to control access to their palette registers.

Set this parameter to Enabled to activate the palette snooping function in the PCI VGA devices installed in your system. Check your VGA card manual for more information about this function.

This parameter enables/disables the on board SCSI AIC-7870.

Boot Device

During POST, the normal booting procedure starts with the initialization of the ISA card, followed by the PCI card, then the onboard SCSI, if present. Enabling this parameter changes the normal booting sequence of the system, doing the SCSI initialization prior to add-on PCI card initialization. You can only set this parameter if the On Board SCSI parameter is set to Enabled. The default setting is Disabled.

4-18 NCR S10 Desktop Server User Guide