Sample Configurations
Sample RAID Configuration
∙Available IRQ settings are 3, 4 ,5, 7, 9, 10, 11, 14, and 15.
∙To make IRQ 3 available for selection, you must disable Serial Port 2 in the System Security menu.
∙To make IRQ 4 available for selection, you must disable Serial Port 1 in the System Security menu.
∙To make IRQ 7 available for selection, you must disable Parallel Port 1 in the System Security menu.
3.Make the following settings:
∙Set PCI IRQ Setting to Manual.
∙Set PCI slot 1 (PCI Ethernet Adapter SMC8432BTA) to IRQ5.
∙Set PCI slot 2 (PCI Token Ring Adapter Olicom
∙Set PCI slot 3 (Mylex PCI RAID Adapter) to IRQ 15.
∙Set the On Board SCSI to IRQ 11.
∙Set the VGA Palette Snoop to Disabled.
∙Set the On Board SCSI
∙Set the Boot Drive to Enabled.
NCR S10 Desktop Server User Guide |
