NCR S10 manual Diskette Drives

		Using the BIOS Setup Utility
		Basic System Configuration
	∙ Second 00 to 59
	To enter the configuration value for the first diskette
Diskette Drives
	drive (drive A), highlight the Diskette Drive A
	parameter. Press the left- or right-arrow key to view the
	options and select the appropriate value.
	The Diskette Drive A parameters have the following
	options:
	∙	None
	∙	360 KB, 5.25-inch
	∙	1.2 MB, 5.25-inch
	∙	720 KB, 3.5-inch
	∙	1.44 MB, 3.5-inch
	∙	2.88 MB, 3.5-inch
	Follow the same procedure to enter the value for the
	Diskette Drive B parameter. Choose None if you do not
	have a second diskette drive.
	Move the highlight bar to the Fixed Disk 0 parameter to

IDE Fixed Disk Drives configure the IDE fixed disk drive (drive C). Use the left or right arrow key to display the IDE fixed disk options with their respective values. Select an option that corresponds to your IDE fixed disk type. Follow the same procedure to enter the values for the IDE Fixed Disk 1 parameter. Choose None if you do not have a second fixed disk drive.

If you do not know the exact type of your IDE fixed disk, select the option Auto. When you select this option, the BIOS utility automatically determines the

NCR S10 Desktop Server User Guide 4-7