NCR S10 manual Securing the Drive

Installing the System

Installing Drives

5.Slide the drive into the drive housing. Secure it with four screws on both sides of the drive housing.

Figure 2-11

Securing the Drive

6.Re-attach the drive frame.

7.Re-install the drive housing in the system unit. Use the round pegs on the system unit surface as guide. Seat the drive housing firmly on the system unit.

Lock the drive housing into position with the holding tabs on both sides of the system unit near the front panel.

8.Match the red stripe on the drive cable with pin 1 on the drive connector and plug it in.

2-22 NCR S10 Desktop Server User Guide