![](/images/new-backgrounds/1268130/268130271x1.webp)
Sample Configurations
Sample RAID Configuration
9.Press [Esc] to return to the main menu in BIOS Setup.
10.Select System Security. On Page 1, set the parameters as follows:
Disk Drive Control |
|
Diskette Drive | [Normal] |
Fixed Disk Drive | [Normal] |
System Boot Drive | [Drive A then C] |
On Board Communication Ports |
|
Serial Port 1 Base Address | [3F8h] |
Serial Port 2 Base Address | [2F8h] |
Parallel Port Base Address | [Parallel 1 (3BCh)] |
Operation Mode [Stndrd PP (SPP)] | |
EPP Version Selection | [1.7] |
Setup Password | [None] |
Power On Password | [None] |
11.Press [Esc] to return to the main menu in BIOS Setup.
To configure the PCI adapters, follow these steps:
Configuring the PCI
Adapters1. Select PCI System Configuration from the main menu in BIOS Setup.
2.Use the up and down arrow keys to select the PCI slot number. Use the right and left arrow keys to change the IRQ Level for INTA Pin settings.
NCR S10 Desktop Server User Guide |