
Avoiding Resource Conflicts
Using the System Utilities
Using the EISA Configuration Utility
If the system uses resources needed by an ISA option, you have to release those resources and reallocate other resources to the system.
To avoid resource conflicts, follow these steps:
1.Specify other resources by selecting Edit, then Change Resource or Change Function.
2.Select System, then Print to print a list of the resources.
3.Select View, then Switch, and Jumper Settings to see how to change the switch and jumper settings. Make a note of the information.
4.Exit from the utility.
5.Turn off the system and set the jumpers and switches.
If you have locked the board configuration using Edit and Lock commands, you need to unlock the configuration to make all resources available to the ECU.
To unlock the configuration, follow these steps:
1.Select Edit, and then Unlock to unlock either the entire system or the current board. The current board is highlighted.
2.Select OK.
3.Select System, then Verify.
NCR S10 Desktop Server User Guide |