Configuring Memory and Other Baseboard Settings

Configuring the

Send Start Unit Command

[yes]

5.Press [Enter] to return to previous menu.

6.Select Advanced Configuration Options and set the parameters as follows:

Host Adapter BIOS (Config Util...)	[Enabled]
Support Removable Disks...	[Boot Only]
Extended BIOS Translation...	[Enabled]
Display <CTRL-A> Message During	[Enabled]
BIOS Initialization...
Multiple LUN Support	[Disabled]
BIOS Support for More than 2...	[Enabled]

7.Press [Enter] to return to previous menu.

8.Press [Esc] until prompted to save configuration. Save the configuration and the system reboots.

Sometimes the EISA Configuration Utility will not boot. If this happens, perform the following procedure:

1.Using the BIOS Setup Utility, disable all PCI adapters.

2.Boot the EISA Configuration Utility.

3.Configure the system.

4.Return to the BIOS Setup Utility, and re-enable the PCI adapters.

To configure the memory and other baseboard settings, follow these steps:

C-9