NCR S10 manual Sample RAID Configuration, Installing

Sample Configurations

Sample RAID Configuration

Sample RAID Configuration

A RAID configuration might consist of the following:

∙Pentium 166 MHz Processor with ECC Memory Support

∙128 MB System Memory

∙ISA Video Board w/1MB Video RAM

∙PCI Ethernet Adapter (SMC8432BTA)

∙PCI Token Ring Adapter (Olicom OC-3136)

∙PCI RAID Adapter (Mylex)

∙Three 2 GB SCSI wide hard drives connected to the Mylex RAID controller

∙One 2 GB SCSI narrow hard drive connected to the onboard AIC-7870 SCSI controller

∙SCSI CD-ROM drive connected to the onboard AIC-7870 SCSI controller

To install the hardware, follow these steps:

Installing the

Hardware1. Strap the SCSI IDs for the four 2 GB SCSI disk drives and the SCSI CD-ROM drive (see the documentation that came with your drives for strapping information).

Note: The 2 GB SCSI narrow hard drive connected to the onboard AIC-7870 SCSI controller should be SCSI ID 0 and will be used as the system boot drive. The other three 2 GB SCSI wide hard drives

C-12 NCR S10 Desktop Server User Guide