Using the BIOS Setup Utility

System Security Setup

unauthorized users. Once you set this password, you have to type it whenever you boot the system.

To set the power-on password, follow the same procedures as in setting the setup password.

Note: To enable the password function, you must strap pins 1-2 on JP2 located on the system baseboard. The factory default setting disables the password function with pins 2-3 strapped. See Figure 2-1 in Chapter 2 for the location of JP2.

NCR S10 Desktop Server User Guide

4-25

Page 77
Image 77
NCR S10 manual System Security Setup