NCR S10 manual Using the Eisa Configuration Utility

Using the System Utilities

Using the EISA Configuration Utility

If your system comes configured with 16 MB or more of system memory, and your system is not configured with an add-on card that requires the use of memory in the 15-16 MB range, select 16 MB Ext Memory with 15-16 MB System Used.

If your system comes configured with 16 MB or more of system memory, and your system is configured with an add-on card that requires the use of memory in the 15-16 MB range, select 16 MB Ext Memory with 15-16 MB Add-On Card Used.

5.After making the appropriate selection, press [Enter]. You are returned to the system baseboard configuration screen.

6.If your system is configured with more than 16 MB of system memory, press [Control] + [R] to select 16 - 64 MB Extended Memory - - - - - - - CTRL-R to add the Memory.

7.Observe the following memory configuration screen:

Memory Address (-) 16 M	Type: SYSTEM
Size 0
(value between 0 - 48M,
in increments of 4M)

8.Tab to the size (amount of memory in range) field.

If your system has 64 MB or more of system memory, enter 48M.

5-14 NCR S10 Desktop Server User Guide