NCR S10 manual Using the Eisa Configuration Utility

Using the System Utilities

Using the EISA Configuration Utility

If your system has less than 64 MB of system memory, subtract 16 MB from the amount of total system memory and enter that value in this field. For example, if your system has 24 MB of total system memory, subtract 16 MB from 24 MB to get 8 MB (24 MB - 16 MB = 8 MB), and enter 8M in the size field.

9.After entering the appropriate selection in the size field, press [Enter]. You are returned to the system baseboard configuration screen.

10.If your system is configured with more than 64 MB of system memory, press [Control] + [R] to select 64 - 128 MB Extended Memory - - - - - - - CTRL-R to add the Memory.

11.Observe the following memory configuration screen:

Memory Address (-) 64 M	Type: SYSTEM
Size 0
(value between 0 - 64M,
in increments of 4M)

12.Tab down to the size field.

If your system has 128 MB of system memory, enter 64M.

NCR S10 Desktop Server User Guide 5-15