NCR S10 manual Configuring the System Memory

Configuring the System Memory

Using the System Utilities

Using the EISA Configuration Utility

Memory is not configured automatically. The system administrator must use the EISA Configuration utility (ECU) to configure the system manually.

To use the ECU to configure the system, follow these steps:

1.Boot the system with the ECU diskette.

2.Select the system baseboard from the configuration screen.

3.Select 4 - 16 MB Extended Memory from the system baseboard configuration screen. The following options display:

4 MB Ext Memory

8 MB Ext Memory

12 MB Ext Memory

16 MB Ext Memory with 15-16 MB System Used

16 MB Ext Memory with 15-16 MB Add-on card used (Pentium used only)

4.Make the selection that is appropriate for your system configuration.

For example, if your system comes configured with 4 MB of system memory, select 4 MB Ext Memory. If your system comes configured with 8 MB of system memory, select 8 MB Ext Memory. If your system comes configured with 12 MB of system memory, select 12 MB Ext Memory.

NCR S10 Desktop Server User Guide 5-13