System Memory
Math Coprocessor
Video Display
Using the BIOS Setup Utility
Basic System Configuration
To use the User option, follow these steps:
1.Highlight the User option.
2.Type in the number of cylinders, heads, and sectors of the IDE fixed disk.
3.Choose YES when asked if you want to save CMOS data.
The system automatically detects the total amount of onboard memory and sets the corresponding value in the Setup program. This information is not adjustable by the user and is for display only. When you install additional memory, the system automatically updates the Total Memory parameter to show the new memory size.
The CPU includes a math coprocessor so this parameter shows Installed by default.
The video display is the monitor on which the operating system prompt displays when you boot the system. The system automatically detects the video mode of your primary display and sets the configuration value accordingly. The values are as follows:
∙Monochrome
∙CGA 40 columns x 25 rows
∙CGA 80 columns x 25 rows
∙VGA/EGA
NCR S10 Desktop Server User Guide |
