NCR S10 manual Sample Standard Configuration, Installing

Sample Configurations

Sample Standard Configuration

Sample Standard

Configuration

A standard configuration might consist of the following:

∙Pentium 166 MHz processor with parity memory support

∙32 MB system memory

∙ISA video board with 1 MB video RAM

∙PCI Ethernet adapter (SMC8432BTA)

∙PCI Token Ring adapter (Olicom OC-3136)

∙2 GB SCSI disk drive connected to an integrated Adaptec 7870 PCI SCSI controller

∙SCSI CD-ROM drive connected to an integrated Adaptec 7870 PCI SCSI controller

Following are the steps to install and configure this sample configuration.

To install the hardware, follow these steps:

Installing the

Hardware1. Strap the SCSI IDs for the 2 GB SCSI disk drive and the SCSI CD-ROM drive. (See the documentation that came with your drives for strapping information.)

2.Install the 2 GB SCSI disk drive over the power supply.

C-2 NCR S10 Desktop Server User Guide