Primera Technology 091211-511276 user manual Robot Options/Bin Selection

Page 26

TOC

INDEX

This operation may be useful to verify software installation discs where it is extremely important to have accurate copies of all installation files. Checking this option will double the time it takes to record each disc.

•Set Time and Date to Mastering Time. If this option is checked, all files on the disc will automatically be set to the current time and date.

B.3 Robot Options/Bin Selection

Double click on the bin icons at the bottom of the screen to access these settings.

Here you can designate the type of media in the left and right bins and finished bin location.

Kiosk Mode (Not available with 4051 models). By default, PTPublisher assumes that discs are loaded into only the right bin. It picks from the right bin and places completed discs in the left bin. Check Kiosk Mode to make the robot pick blank media from both the right and left bins. Finished media will be placed in Kiosk bin. Kiosk Mode still requires the same type of media in both the right and left bins. See Section 2D for instructions on setting up the Kiosk bin.

Bin Selection (Not available with 4051 models). Enable Bin Selection to use different types of media in the left and right bins. Check the box and set the media type to one of the avail- able options. Once Bin Selection is enabled the contents of the bin will be reflected next to the bin icons. To take advantage of this feature choose a specific type of media on step one of the data project. Other project types will automatically select the correct type of media. When you queue multiple projects with different media types the robot will now choose from the left or right bin depending on what media type is selected in the project and set for the bin. All finished discs will be placed in the kiosk bin.

Note: PTPublisher has no way to verify if the actual discs loaded into the bin are CDs, DVDs, DVD-DL or BDR. It is up to the user to make sure the designated media is in the correct bin.

22Creating Discs

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Series Printing History Table of Contents Interactive Feature Getting Started Thank YOU…TOC Choosing a Good LocationUnpacking and Inspection Identifying the Parts Front Panel and TopRear Panel System Requirements Loading Media DiscsTOC Replacing INK Cartridges / LOW INK Warning TOC Setup the Kiosk BIN not Included with 4051 Models ClickIng the Locating Tabs on Creating Discs Tutorial Copy a Disc Print only for Autoprinter UsersTOC TOC Copy Project Using PtpublisherProject Types Video Project Data ProjectAudio Project Image Project Add DataAdd Print To select an existing labelStart Project Summary Settings Project SummaryProject Options Recording Type Robot Options/Bin Selection Publisher Status Backup Project PC Disc Publishers Only Correct bin TOC Rip Audio CD PC Disc Publishers Only TOC Projects Sets PC Disc Publishers Only Add existing saved project to a new project setTOC Creating a Print Label Using Surething PC Creating a Print Label Using Disc Cover MAC TOC Inspector TOC Advanced Printer Settings Print QualityOuter Margin Ink CartridgeSaturation Color Mode Color Table Inner DiameterPrinter Utilities and Cost Estimator Cost EstimatorCenter Print Image Calibrate the Disc PublisherCartridge Alignment Back Label Design Requirements for Other Graphics Programs Clean Print HeadChange Cartridges Maintenance Interpreting the PUBLISHER’S Indicators LightsInternal Blue LED Lights Manual method Cleaning the Print HeadAutomatic method Replacing the Print Head Replace the cartridges Technical Support Source LocationTechnical Specifications Disc Cover Blu-rayCopy Project Inner Diameter 14, 19Windows Media Player
Top Page Image Contents