Primera Technology 091211-511276 user manual Inner Diameter, Color Mode Color Table

Page 42

TOC

INDEX

Inner Diameter

This value changes the size of the non-printed center. Larger numbers cause the non-printed center to be larger and smaller numbers make the non-printed center smaller. This number is incremented by 0.1mm so a change of 10 for inner diameter changes the diameter by 1mm. Set the diameter to 230 for Primera TuffCoat media. To use the preset outer diameter set- ting for Primera media select the media type from the drop down box at the top of the printer settings area.

Color Mode

Best for Graphics mode is best used for graphical images where accurate color reproduction is not as essential. Images printed in this mode will look more vibrant because more ink is being used to produce them. However, printing images of people may produce skin tones that have a reddish tint.

Best for Photos mode is best used for photographic images where accurate color reproduction is very essential. Images printed in this mode will look lighter than those printed in Photo mode. Skin tones especially will look more natural in this mode.

NOTE: Exact color matching of the printed discs to the screen may never be possible since there are factors that affect this out of the drivers control. The surface of the disc reacts with the ink in the cartridge to produce the color. For this reason, when printing the same image to different types of discs with different surfaces the printed output can look entirely different.

Color Table

Adjust the Color Table setting to adjust the color matching for any image. There are six different color tables to choose from. Since color matching is greatly dependent on the media being printed on, there is no reliable way to differentiate between these tables. Experiment with all the tables and choose the one that works best for you.

38Creating Discs

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Series Printing History Table of Contents Interactive Feature Getting Started Thank YOU…TOC Choosing a Good LocationUnpacking and Inspection Identifying the Parts Front Panel and TopRear Panel System Requirements Loading Media DiscsTOC Replacing INK Cartridges / LOW INK Warning TOC Setup the Kiosk BIN not Included with 4051 Models ClickIng the Locating Tabs on Creating Discs Tutorial Copy a Disc Print only for Autoprinter UsersTOC TOC Using Ptpublisher Project TypesCopy Project Data Project Audio ProjectVideo Project Image Project Add DataAdd Print To select an existing labelStart Project Summary Settings Project SummaryProject Options Recording Type Robot Options/Bin Selection Publisher Status Backup Project PC Disc Publishers Only Correct bin TOC Rip Audio CD PC Disc Publishers Only TOC Projects Sets PC Disc Publishers Only Add existing saved project to a new project setTOC Creating a Print Label Using Surething PC Creating a Print Label Using Disc Cover MAC TOC Inspector TOC Advanced Printer Settings Print QualityInk Cartridge SaturationOuter Margin Color Mode Color Table Inner DiameterPrinter Utilities and Cost Estimator Cost EstimatorCalibrate the Disc Publisher Cartridge AlignmentCenter Print Image Back Clean Print Head Change CartridgesLabel Design Requirements for Other Graphics Programs Maintenance Interpreting the PUBLISHER’S Indicators LightsInternal Blue LED Lights Cleaning the Print Head Automatic methodManual method Replacing the Print Head Replace the cartridges Technical Support Source LocationTechnical Specifications Disc Cover Blu-rayCopy Project Inner Diameter 14, 19Windows Media Player
Top Page Image Contents