Primera Technology 091211-511276 user manual Ink Cartridge, Saturation, Outer Margin

Page 41

TOC

INDEX

Ink Cartridge

Color + Black is best for images that have large areas of black graphics or text. Although you can print these same images with just the color cartridges, often the blacks will look darker with this setting. To make sure the black cartridge is used the black areas of the source image must be 100% black. If SureThing or Disc Cover is used to create black text or graph- ics you can be assured that the black areas are 100% black. However, if you are using a JPG image, even areas that look black may not use the black cartridge since the JPG format compresses the image.

Color Only is the default setting and is best for most images. With this setting the printer only uses the color cartridges to produce all colors including gray scale black and white images.

Monochrome Black is for images that have large black areas or black text. This will ensure that no color ink is being used.

Saturation

This option controls the ink saturation of the printed image. When printing onto the printer manufacturer's TuffCoat media, this option can be left at its default setting of 100%. When printing onto other brands of printable media, you may need to adjust this control in order to optimize the ink satura- tion for the printable surface of your specific media. Click on the up and down arrows to change the ink saturation setting. Lower numbers reduce the overall ink saturation, while higher numbers increase it. If discs do not seem to be drying completely it may be necessary to reduce this value.

Outer Margin

Adjust this value to print all the way to the outer edge of a disc. This is useful if you are printing full coverage images. The lower you set this value the farther to the outer edge of the disc you will print. Please note that with most media the printable surface does not extend all the way to the edge of the disc. Because of this you will not normally set this value to zero. You may also want to adjust the inner diameter setting. To use the preset outer diameter setting for Primera media, select the media type from the drop down box at the top of the printer settings area.

Creating Discs 37

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Series Printing History Table of Contents Interactive Feature Thank YOU… Getting StartedChoosing a Good Location TOCUnpacking and Inspection Front Panel and Top Identifying the PartsRear Panel Loading Media Discs System RequirementsTOC Replacing INK Cartridges / LOW INK Warning TOC Click Setup the Kiosk BIN not Included with 4051 ModelsIng the Locating Tabs on Tutorial Copy a Disc Print only for Autoprinter Users Creating DiscsTOC TOC Copy Project Using PtpublisherProject Types Video Project Data ProjectAudio Project Add Data Image ProjectTo select an existing label Add PrintProject Summary Start Project Summary SettingsProject Options Recording Type Robot Options/Bin Selection Publisher Status Backup Project PC Disc Publishers Only Correct bin TOC Rip Audio CD PC Disc Publishers Only TOC Add existing saved project to a new project set Projects Sets PC Disc Publishers OnlyTOC Creating a Print Label Using Surething PC Creating a Print Label Using Disc Cover MAC TOC Inspector TOC Print Quality Advanced Printer SettingsOuter Margin Ink CartridgeSaturation Inner Diameter Color Mode Color TableCost Estimator Printer Utilities and Cost EstimatorCenter Print Image Calibrate the Disc PublisherCartridge Alignment Back Label Design Requirements for Other Graphics Programs Clean Print HeadChange Cartridges Interpreting the PUBLISHER’S Indicators Lights MaintenanceInternal Blue LED Lights Manual method Cleaning the Print HeadAutomatic method Replacing the Print Head Replace the cartridges Source Location Technical SupportTechnical Specifications Copy Project Blu-rayDisc Cover Inner Diameter 14, 19Windows Media Player
Top Page Image Contents