Primera Technology 091211-511276 user manual Calibrate the Disc Publisher, Cartridge Alignment

Page 44

TOC

INDEX

•You will need to Set the Cartridge Cost first before receiv- ing a cost per disc. Adjust the cartridge costs according to the actual price paid. The estimate does not take currency into account so you can assume that whatever value you entered is displayed in your currency.

•Save a screen capture of the cost by clicking the disc icon.

•Print a screen capture of the cost by clicking the printer icon.

Important Note: The cost per disc represents the average cost per disc over an entire run of labels. This means that the per label cost will decrease and become more accurate as the number of labels printed increases. This is because the ink that is used for initial job starting cartridge maintenance is divided into a larger number of labels.

Calibrate the Disc Publisher

Several advanced calibrations can be performed with this utility. Under normal circumstances you would have no reason to perform any of the calibrations since all of them are factory calibrated. However, if the Disc Publisher is having trouble picking from any location, the calibrations available here can be used to correct this problem.

Cartridge Alignment

The Cartridge Alignment prints a test print and then automati- cally scans the print to configure your printer for bidirectional printing and to align the color and black cartridges for Color+Black printing. It is important to perform this calibration every time you change a cartridge. If you forget to perform this calibration you will be prompted to do so before your first print from the new cartridge.

Center Print Image

NOTE: Your printer comes from the factory pre-calibrated to print the image to the center of the CD. You can use this adjustment if you need to fine-tune this location.

If you ever wish to verify your factory-calibrated Vertical and Horizontal calibration settings, you can run a simple calibration procedure to assure that your images will be centered when printed on a CD. To do this, refer to the following steps:

40Creating Discs

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Series Printing History Table of Contents Interactive Feature Getting Started Thank YOU…TOC Choosing a Good LocationUnpacking and Inspection Identifying the Parts Front Panel and TopRear Panel System Requirements Loading Media DiscsTOC Replacing INK Cartridges / LOW INK Warning TOC Setup the Kiosk BIN not Included with 4051 Models ClickIng the Locating Tabs on Creating Discs Tutorial Copy a Disc Print only for Autoprinter UsersTOC TOC Copy Project Using PtpublisherProject Types Video Project Data ProjectAudio Project Image Project Add DataAdd Print To select an existing labelStart Project Summary Settings Project SummaryProject Options Recording Type Robot Options/Bin Selection Publisher Status Backup Project PC Disc Publishers Only Correct bin TOC Rip Audio CD PC Disc Publishers Only TOC Projects Sets PC Disc Publishers Only Add existing saved project to a new project setTOC Creating a Print Label Using Surething PC Creating a Print Label Using Disc Cover MAC TOC Inspector TOC Advanced Printer Settings Print QualityOuter Margin Ink CartridgeSaturation Color Mode Color Table Inner DiameterPrinter Utilities and Cost Estimator Cost EstimatorCenter Print Image Calibrate the Disc PublisherCartridge Alignment Back Label Design Requirements for Other Graphics Programs Clean Print HeadChange Cartridges Maintenance Interpreting the PUBLISHER’S Indicators LightsInternal Blue LED Lights Manual method Cleaning the Print HeadAutomatic method Replacing the Print Head Replace the cartridges Technical Support Source LocationTechnical Specifications Blu-ray Copy ProjectDisc Cover Inner Diameter 14, 19Windows Media Player
Top Page Image Contents