Primera Technology 091211-511276 user manual Start Project Summary Settings

Page 23

TOC

INDEX

•Outer Margin. Discs from other manufacturers vary widely regarding how far the printable surface extends to the edge of the disc. Measure the distance from the edge of the disc to the start of the white printable area. This will be between 0 and 2 mm in increments of .1mm.

•Inner Diameter. Discs from other manufactures vary widely regarding how for the printable surface extends to the inside of the disc. Measure the distance from one side of the inner non-printable center hub to the other. This will be between 15 mm and 50 mm displayed in increments of

.1mm.

Note: Additional print settings are explained in Section 2E.

To Create a new label:

1.Click the Create Label button.

2.The label design application SureThing (PC) or Disc Cover (Mac) will open.

Design your label using the included backgrounds and clipart. You may also add your own image, add text and any other design features.

3.Save your label by going to the File menu - Save as.

4.Close SureThing or Disc Cover.

5.You will be asked if you would like to use the label you just created in your current project. Click Yes.

6.You may now choose to adjust print settings as described above.

Step 3: Start Project (Summary - Settings)

In this step you can verify data and print information and set the number of copies. Optionally you may choose to edit burn settings. However, the default settings are optimized to give you the best quality burn. Simply click Go to start the job.

A summary of all the options on this step is listed below.

Project Summary

This areas displays information about the data you have chosen, a thumbnail and file name of the print file you have chosen and picture and description of the Disc Publisher Robot you have chosen. If any of this information is incorrect, use the back arrow at the bottom of the screen to go back to appropriate window to correct it.

Creating Discs 19

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Series Printing History Table of Contents Interactive Feature Thank YOU… Getting StartedChoosing a Good Location TOCUnpacking and Inspection Front Panel and Top Identifying the PartsRear Panel Loading Media Discs System RequirementsTOC Replacing INK Cartridges / LOW INK Warning TOC Click Setup the Kiosk BIN not Included with 4051 ModelsIng the Locating Tabs on Tutorial Copy a Disc Print only for Autoprinter Users Creating DiscsTOC TOC Copy Project Using PtpublisherProject Types Video Project Data ProjectAudio Project Add Data Image ProjectTo select an existing label Add PrintProject Summary Start Project Summary SettingsProject Options Recording Type Robot Options/Bin Selection Publisher Status Backup Project PC Disc Publishers Only Correct bin TOC Rip Audio CD PC Disc Publishers Only TOC Add existing saved project to a new project set Projects Sets PC Disc Publishers OnlyTOC Creating a Print Label Using Surething PC Creating a Print Label Using Disc Cover MAC TOC Inspector TOC Print Quality Advanced Printer SettingsOuter Margin Ink CartridgeSaturation Inner Diameter Color Mode Color TableCost Estimator Printer Utilities and Cost EstimatorCenter Print Image Calibrate the Disc PublisherCartridge Alignment Back Label Design Requirements for Other Graphics Programs Clean Print HeadChange Cartridges Interpreting the PUBLISHER’S Indicators Lights MaintenanceInternal Blue LED Lights Manual method Cleaning the Print HeadAutomatic method Replacing the Print Head Replace the cartridges Source Location Technical SupportTechnical Specifications Inner Diameter 14, 19 Blu-rayCopy Project Disc CoverWindows Media Player
Top Page Image Contents