TOC | INDEX |
Queue Project. To queue another project to run after the current one is finished simply setup the project as you normally would. When you get to the third step of the project setup wizard, if a project is currently running, a Queue button will appear instead of a Go button. Click it to
queue the job.
B.5 Backup Project (PC Disc Publishers Only)
To create a new backup project you must setup a data project and then schedule it. Follow these steps:
1.Choose Data Project from the project starter window.
2.Add the files or folders that you would like to backup. Typically there will be more data to backup than will fit on any one CD, DVD etc. If that happens you will receive a warning message and the data bar at the bottom of the screen will turn red.
To resolve this issue you may choose to span the data over several CDs or DVDs or change the media to a different type with more data capacity.
If you choose to check the span disc box you do not need to change media type. A Span Report button will appear which will tell you how the data will be distributed over the chosen media type.
24Creating Discs