Lanier 5627 AG manual File Transfer, Delivery Server IP Address, Fax RX File Transmission, Default

User Tools (System Settings)

File Transfer

Make these settings as required when using ScanRouter V2 Lite/Professional.

Note

❒The file transfer function requires the optional Hard Disk Unit.

❒The optional ScanRouter V2 Professional is required for distributing received fax documents.

❖Delivery Server IP Address

Specifies the IP address of the ScanRouter V2 Lite delivery server for distrib- uting documents or data from the machine.

4	Note
	❒ Default: 000.000.000.000

❒Press the [←] or [→] key to move between each group of three numbers.

❒If you make a mistake, press and enter the correct number.

❒You must also set the delivery server IP address on ScanRouter V2 Lite/Professional. The relevant setting on the machine will be overwritten by the delivery server IP address set on ScanRouter V2 Lite/Professional.

❖Fax RX File Transmission

• Setting per Line

Specifies whether or not received fax documents should be sent to Scan- Router V2 Professional for each of the fax lines.

Note

❒Default: G3 Port 1/Do not Deliver, G3 Port 2/Do not Deliver, G3 Port 3/Do not Deliver

•Print at Delivery

Specifies whether or not received fax documents that are sent to ScanRout- er V2 Professional should also be printed by the machine at the same time.

Note

❒Default: No

•File to Deliver

Specifies whether all received fax documents or only received fax docu- ments that include delivery codes (documents with an ID and F code) should be sent to ScanRouter V2 Professional.

Note

❒Default: File with Dlvry Code

82