Philips LFF 6020 Setting up a multifunction machine, An example of how an AD-HOC network

Page 33

LFF6020

2827 - SETUP / WLAN / PARAMETERS / SECURITY

This parameter allows you to make your network secure by setting the encryption method to use in your WLAN network.

1

Type in

, select the menu SETUP using the keys

 

or

and confirm with OK.

 

 

2

Select WLAN using the keys or

and confirm

 

with OK.

 

 

3

Select PARAMETERS using the keys

or and

 

confirm with OK.

 

 

4

Select SECURITY using the keys

or

and

 

confirm with OK.

 

 

5Choose WEP, WPA or OFF and confirm with OK.

-If you choose WEP, enter a password:

-In a 64 bit security configuration, the password must contain five characters exactly.

-In a 128 bit security configuration, the password must contain 13 characters exactly.

You may also enter the password using the hexadecimal system, if this is the case:

-For a 64 bit security configuration,

Note the password must contain exactly 10 hexadecimal characters.

-For a 128 bit security configuration, the password must contain exactly 26 hexadecimal characters.

-If you choose WPA, enter a WPA or WPA2 password (min. 8 characters to 63 characters max.).

The password can contain alphanumerical characters - numbers and letters - and any other symbol available on the keypad. The only invalid character is "€" (euro currency sign).

6Exit this menu by pressing the key.

2828 - SETUP / WLAN / PARAMETERS /

HOSTNAME

The machine name allows you to identify your machine on the network via a PC (for example with the name "PRINT- NETWORK-1").

1

Type in

, select the menu SETUP using the keys

 

or

and confirm with OK.

 

 

2

Select WLAN using the keys or

and confirm

 

with OK.

 

 

3

Select PARAMETERS using the keys

or

and

 

confirm with OK.

 

 

4

Select HOSTNAME using the keys

or

and

 

confirm with OK.

 

 

5Type in the desired name (15 characters maximum) and confirm with OK.

6Exit this menu by pressing the key.

Once your connection has been set up, you must install

features

An example of how an AD-HOC network

the network printer driver on your PC so that you can print

 

your documents.

 

Refer to the paragraph Software installation, page 34.

 

may be set up

Network

An example of how to configure an Ad-hoc network

 

without security protection using the following

 

parameters:

 

•

network name: "house"

-

•

radio type: "ad-hoc"

•

channel: "1"

6

• PC’s IP address: "169.254.0.1"

 

• PC’s subnetwork mask: "255.255.0.0"

 

•

PC’s gateway: "0.0.0.0"

 

• IP address of the multifunction machine: "169.254.0.2"

• subnetwork mask of the multifunction machine: "255.255.0.0"

• multifunction machine’s gateway: "0.0.0.0"

Setting up a multifunction machine

1Plug the WLAN USB key into the USB connector of the multifunction machine.

2

Type in

, select the menu SETUP using the keys

 

or

and confirm with OK.

 

3

Select WLAN using the keys or and confirm

 

with OK.

 

4

Select CONFIG. ASS. using the keys

or and

 

confirm with OK.

 

5

Select NEW NETWORK using the keys

or

 

and confirm with OK.

 

6SSID appears on the screen, enter "house" using the numerical keypad and confirm with OK.

7Select the mode AD-HOC MODE and confirm with OK.

8Enter "1" in the field CHANNEL and confirm with OK.

9Select OFF and confirm with OK.

10Select IP CONF.: MANU and confirm with OK.

11Enter "169.254.0.2" in the field IP ADDRESS and confirm with OK.

12Enter "255.255.0.0" in the field SUBNET MASK and confirm with OK.

13Enter "0.0.0.0" in the field GATEWAY and confirm with OK.

14At the end of this process, you return to the main menu of ASS. CONFIG.

15 Exit this menu by pressing the key.

Once the network has been set up, the LED of the WLAN USB key should be on.

You must now set up the PC.

- 29 -

Page 32 Page 34
Image 33
Page 32 Page 34
Contents LFF Dear customer Dear customerConsumables Contents Maintenance ContentsSecurity Environment Software use license SecuritySecurity directives Declaration of ConformityEME Compliance for Canada Laser Safety InformationFor Europe/Asia For North AmericaSymbols for the main power switch Positions of Safety labels on the machineCertifications in Europe Regulatory InformationCE Marking Traceability Information For EU Countries Only ManufacturerPackaging EnvironmentBatteries and rechargeable batteries ProductSoftware use license Registered trademarks Prohibited reproductionsApplicable law Installation InstallationLocation conditions Running environmentSafety During Operation Safety informationHandling the unit Paper recommendationsRules for use symbols Terminal description Accessing terminal menus Command panelPackaging contents Device installationFeed cassette paper insertion Paper delivery stop Cartridge installationStarting your device Device initial setupPaper insertion in the manual input tray Device connectionInstallation Copy CopyResolution setup Special setup for the copyingZoom setup Advanced FCT/COPY/RESOLUTIONContrast setup Analysis origin setup Paper tray selectionFlat-bed analysis margins setup Brightness setupFormat paper setup Top and bottom printing margins setupAdvanced FCT/SCAN. & PRINT/TOP Print Advanced FCT/SCAN. & PRINT/ Paper FormatParameters/Setup Parameters SetupLanguage Technical ParametersPrinting the functions guide Print the list of setupsLock the machine Read the countersCalibrate your scanner Display the consumables statusAdvanced FCT / Consumables Advanced FCT / CalibrationGames Print the solution to a gridSudoku Print a gridNetwork features Network featuresType of radio network Radio networks WlanConfigure your network Connect your Wlan adaptorCreating or rejoining a network Referring to or changing your network parameters May be set up Setting up a multifunction machineSetup / Wlan / Parameters / Security Setup / Wlan / Parameters HostnameSetting up the PC USB memory key USB memory keyUse of the USB memory key Print your documentsSave a document on a USB memory Key KeyDelete your files located in the key Media / Delete / ManualUSB memory key PC Features PC FeaturesConfiguration requirements Software installationCompanion Suite Companion Suite PRO LL2 Installing drivers only On Windows 2000, XP and Vista Installing the drivers manuallyConnections Multifunction Terminals Supervision Companion DirectorCompanion Monitor Display the consumable status Down menu.Features PCStatus of the connection Device parametersDocument analysis Companion Suite Pro functionalitiesPrinting Analysis with Scan To20 lbs/m² Letter paper Printing in duplex mode with the multifunction machineUninstall the software from your PC Software UninstallationUninstall the drivers from your PC Uninstall the drivers manuallyPC Features Service MaintenanceToner cartridge replacement General informationCleaning Printer issuesPrinter cleaning Issue encountered Print request handling PC printing issuesPaper jam PC printing via USB connectionMaintenance Firmware updatePC printing via Wlan connection Physical specifications SpecificationsElectrical specifications Environmental specificationsConsumable specifications Reference paperToner cartridge Page 253118294-A LFF6020
Top Page Image Contents