Warranty and Service, Digital clock, Storage

To adjust the LCD panel:

1Insert a ﬂat-headed screwdriver into the sides of the LCD panel.

2Gently apply pressure to pop the LCD panel out of the UPS housing.

1Rotate the LCD panel 180°.

2Snap the LDC panel back into the UPS housing.

Digital clock

Your UPS features a digital clock as part of the LCD panel.

To set the time:

1Use the sharp end of a pen to ﬁrmly depress the hours button.

2 Hold the button down until the cor- rect hour appears.

3 Release the button.The hour will be set.

4 Repeat this procedure to set the minutes, using the minutes button.

6 Storage

Follow the steps below to store your UPS.

To store your UPS:

1Make sure the battery of the UPS is fully charged.

2Turn off the power to the UPS.

3Unplug the UPS from the wall outlet.

4Disconnect all equipment to the UPS.

5 Cover the UPS completely.

During periods of extended storage, recharge the UPS battery every three months to ensure battery life.

7 Warranty and Service

Limited Lifetime Warranty

Philips warrants that this product shall be free from defects in material, workman- ship, and assembly under normal use, in accordance with the speciﬁcations and warnings, for the life of this product.A surge protector protects your equipment by absorbing and dissipating dangerous