Xerox SquareFold Trimmer manual Check the Trimmer Waste Container

Page 22

Problem solving		SquareFold Trimmer Module

Fault code	Possible cause	Recommended solution

	Jam or communication error	1. Power off/on the copier/printer.
	with the SquareFold
	Trimmer Module

2. If fault persists, call for service.

Jam/fault with the	1.	Open the Top Left and Right Covers of the SquareFold
SquareFold Trimmer Module		Trimmer Module.
	2.	Carefully remove all sheets and paper scraps from jam
		clearance areas.
	3.	Close the SquareFold Trimmer Module Top Left and Right
		Covers.
	4.	Check the Trimmer Waste Container:
		• If full, empty the container and reinsert it into the
		SquareFold Trimmer Module.
		• If the container is partially pulled out, push it
		completely in.
	5.	If machine’s UI continues to reflect a fault/jam, open the
		finisher and remove any jams.
		• Close the finisher cover(s).
	6.	Follow the instructions shown on the machine’s UI to
		resume printing/copying.

18	User Guide

Image 22

Contents User Guide Page Table of contents Table of contents Overview IntroductionIdentifying the components Main componentsPaper path Control panel Square Fold feature Accessing the Square Fold optionsNetwork print jobs Square Fold options Booklet Trimming / PressingOverview Trimmer feature Accessing the Trimmer optionsNetwork print jobs Trimmer options Lbs./g/m² Setting mm Hints and tips Printing full-page images on bookletsFollow these tips Problem solving Jam clearanceProblem solving Fault Codes Check the Trimmer Waste Container If fault persists, power off/on the copier/printer Problem solvingSquareFold Trimmer Module Specifications Physical characteristicsTechnical data