Xerox SquareFold Trimmer manual Hints and tips, Printing full-page images on booklets

Page 17

Hints and tips

Printing full-page images on booklets

When using full-page images, ensure that the finished

 

 

booklet size accommodates any full-page images, and that

1.

2.

when the booklet is trimmed, these images are not

 

truncated. Refer to the illustration.

1.This booklet has preprinted front and back covers with a full-page image. It was printed on 8.5 x 14 in./B4

paper. The front cover, which was trimmed, displays the entire image.

2.This same booklet was printed on 8.5 x 11 in./A4 paper. The image on the front cover is truncated after

trimming it.

Before you print/copy any booklet job, you should consider your whole job, including the following:

What is the desired size of the finished booklet?

Does the booklet contain full-page images?

Are you using preprinted covers with full-page images?

Are you trimming the booklet?

Do you need to shift any full-page images in order to ensure they fit on the finished booklet?

These are important questions which can affect the output of your booklet jobs, especially if you are using full-page images and trimming the booklet edges.

User Guide

13

Image 17
Contents User Guide Page Table of contents Table of contents Introduction OverviewMain components Identifying the componentsPaper path Control panel Accessing the Square Fold options Square Fold featureNetwork print jobs Booklet Trimming / Pressing Square Fold optionsOverview Accessing the Trimmer options Trimmer featureNetwork print jobs Trimmer options Lbs./g/m² Setting mm Printing full-page images on booklets Hints and tipsFollow these tips Jam clearance Problem solvingProblem solving Fault Codes Check the Trimmer Waste Container If fault persists, power off/on the copier/printer Problem solvingSquareFold Trimmer Module Physical characteristics SpecificationsTechnical data