Xerox SquareFold Trimmer manual Identifying the components, Main components

Page 6

Overview

Identifying the components

Main components

The main components consist of the following:

1. Top Left Cover: Open this cover to remove paper jams. The

1.

square fold mechanism is found in this area.

 

2.Top Right Cover: Open this cover to remove paper jams. The trimming mechanism is found in this area.

Tip

The top covers cannot be opened during normal operation or when the machine is idle. The covers can be opened only when an indicator is lit (refer to page 4) and a jam/fault occurs within the SquareFold Trimmer Module.

SquareFold Trimmer Module

2.

3.

4.

5.

3.Control Panel: The Control Panel consists of a mimic display, buttons, and various indicator lights. The control panel is discussed in more detail on page 4.

4.Booklet Output Tray: This tray receives square-fold booklet output from the finisher.

5.Trimmer Waste Container: Collects scrap/waste from the trimmer. Pull open to remove and dispose of trimmer waste scraps.

2

User Guide

Image 6
Contents User Guide Page Table of contents Table of contents Overview IntroductionIdentifying the components Main componentsPaper path Control panel Square Fold feature Accessing the Square Fold optionsNetwork print jobs Square Fold options Booklet Trimming / PressingOverview Trimmer feature Accessing the Trimmer optionsNetwork print jobs Trimmer options Lbs./g/m² Setting mm Hints and tips Printing full-page images on bookletsFollow these tips Problem solving Jam clearanceProblem solving Fault Codes Check the Trimmer Waste Container If fault persists, power off/on the copier/printer Problem solvingSquareFold Trimmer Module Specifications Physical characteristicsTechnical data