SquareFold Trimmer Module | Overview |
Square Fold feature
Accessing the Square Fold options
The Square Fold feature can be selected for both your copy and network print jobs. Depending on the copy/print job, the Square Fold feature can be selected from either the machine's UI or from the print driver on your workstation.
If your machine is connected to a print server, the Square Fold feature can also be selected at the print server for the selected job.
Note
The Square Fold feature is available only when your machine is connected to both a finisher with a booklet maker and the SquareFold Trimmer Module.
To access the Square Fold feature, perform one of the following (as applicable for your copy or network print job):
For copy jobs, perform the following:
1.From the machine's UI select Copy and the Output Format tab.
2.Select either Booklet Creation or Folding.
-If using the Booklet Creation feature, continue to Step 3.
-If using only the Folding feature, continue to Step 4.
3.From the Booklet Creation screen, select On and Fold & Staple.
-From the Booklet Creation - Fold & Staple screen, select either Fold Only or Fold & Staple.
-To access the Square Fold feature, select the Booklet Trimming/Pressing button.
Tip
The term "Book Pressing" is used synonymously with the terms "Square Fold" or "Square Folding."
Note
The Square Fold (Book Pressing) feature and its related options are discussed in the section entitled "Square Fold options."
4.From the Folding screen, select Single Fold.
-Select Fold as a Set.
-Select the Booklet Trimming/Pressing button to access the Square Fold (Book Pressing) feature.
User Guide | 5 |