Xerox SquareFold Trimmer manual If fault persists, power off/on the copier/printer

Page 23

	SquareFold Trimmer Module			Problem solving

	Fault code	Possible cause		Recommended solution

		A top cover is open.	1.	Open the Top Left and Right Covers of the SquareFold
				Trimmer Module.
			2.	Close the SquareFold Trimmer Module Top Left and Right
				Covers.
			3.	If fault persists, power off/on the copier/printer.
			4.	If fault persists, call for service.

		The Trimmer Waste Container is full or	1.	Pull open the container and empty any trimmer scraps from
		has a fault.		it.
			2.	Reinsert the container into the SquareFold Trimmer Module.
			3.	Ensure that the container is fully pushed in, and that the
				indicator light is not lit.
			4.	If fault persists, repeat Steps 1-3.
			5.	If fault persists, power off/on the copier/printer.
			6.	If fault persists, call for service.

Booklet Tray on the SquareFold Trimmer Module is full.

1. Remove any booklets from the tray.

2.If fault persists, power off/on the copier/printer.

3.If fault persists, call for service.

User Guide

19

Image 23

Contents User Guide Page Table of contents Table of contents Introduction OverviewMain components Identifying the componentsPaper path Control panel Accessing the Square Fold options Square Fold featureNetwork print jobs Booklet Trimming / Pressing Square Fold optionsOverview Accessing the Trimmer options Trimmer featureNetwork print jobs Trimmer options Lbs./g/m² Setting mm Printing full-page images on booklets Hints and tipsFollow these tips Jam clearance Problem solvingProblem solving Fault Codes Check the Trimmer Waste Container If fault persists, power off/on the copier/printer Problem solvingSquareFold Trimmer Module Physical characteristics SpecificationsTechnical data