Black Box KV2016A To access the Flag dialog box, To determine how the status ﬂag is displayed

Page 27

CHAPTER 4: BASIC OPERATIONS

OSD Status Flags

FlagDescription

Flag type by name

Flag type by EID number

Flag indicating that the user was disconnected from all systems

Flag indicating that Broadcast mode is enabled

Flag indicating that the user is sharing but has no control

Flag indicating that the user is sharing and has control

To access the Flag dialog box:

1.Press Print Screen. The Main dialog box will appear.

2.Click Setup - Flag. The Flag dialog box appears.

Figure 4-8. Flag Dialog Box

To determine how the status ﬂag is displayed:

1.Select Name or EID to determine what information will be displayed.

2.Select Displayed to show the ßag all the time or select Timed to display the ßag for only Þve seconds after switching.

3.Select a ßag color in Display Color.

4.In Display mode, select Opaque for a solid color ßag or select Transparent to see the desktop through the ßag.

5.To position the status ßag on the desktop:

a.Click Set Position to gain access to the Position Flag screen.

b.Left-click on the title bar and drag to the desired location.

c.Right-click to return to the Flag dialog box.

Figure 4-9. Set Position Flag

25

Image 27

Contents April Page Servswitch Family Welcome to the ServSwitch FamilyEuropean Union Declaration of Conformity Servselect II INSTALLER/USER GuideJapanese Compliance Statement Other Agency Approvals Compliance StatementsInstrucciones DE Seguridad Normas Oficiales Mexicanas NOM Electrical Safety StatementNOM Statement Contents Specifications SpecificationsMultiplatform support Features and BenefitsServer Access Modules IntroductionIntroduction Example ServSelect II Configuration Safety PrecautionsRack mount safety considerations Supplied with the ServSelect InstallationGetting Started Rack Mounting Your ServSelectTo install the 1U switch mounting bracket InstallationBasic ServSelect II Configuration Installing the ServSelectSetting Up Your ServSelect II System To connect an SAM to each serverTo connect local peripherals Viewing and Selecting Ports and Servers To access the Main dialog boxBasic Operations Controlling Your System at the Analog PortsBasic Operations OSD Status SymbolsViewing the status of your appliance Selecting serversSoft switching To conﬁgure servers for soft switchingTo soft switch to a server OSD Navigation Basics Navigating the OSDConfiguring the OSD Setup Features to Manage Routine Tasks for Your ServersTo access the Setup menu To access the Names dialog box Assigning server namesTo assign names to servers Assigning device types To access the Devices dialog boxTo access the Menu dialog box Changing the display behaviorTo assign a device type To choose the default display order of servers To set a Screen Delay Time for the OSDControlling the status flag To determine how the status ﬂag is displayed To access the Flag dialog boxSetting console security To access the Security dialog boxTo set or change the password To log in to your console To password protect your consoleTo remove password protection from your console To enable the screen saver mode with no password protectionTo immediately turn on the screen saver To exit the screen saver modeDisplaying Version Information To turn off the screen saverClick X to close the SAM Version dialog box To add servers to the scan list Scanning Your SystemTo start the scan mode To cancel scan modeTo remove a server from the scan list Broadcasting to Servers To access the Broadcast dialog boxChanging Your Switch Mode To broadcast to selected serversTo turn broadcasting off To enable sharing To access the Switch dialog boxShipping and Packaging TroubleshootingTroubleshooting Calling Black BOXTo upgrade ﬁrmware Flash UpgradesPossible error conditions Items needed for the upgradeFlash Upgrades To simultaneously upgrade multiple SAMsUpgrading the SAM firmware Version Dialog Box To upgrade SAM ﬁrmware individuallySAM Load Dialog Box Servselect II INSTALLER/USER Guide Page Page Page Doc. No -330-001A