Black Box KV2016A, KV2016E manual Specifications

Page 9

CHAPTER 1: SPECIFICATIONS

1. Specifications

During the course of this product s lifetime, modifications might be made to its hardware or firmware that could cause these specifications to change without notice.

Agency Approvals

	EN55022 Class A, EN55024, EN61000-3-3, FCC15 Class
	A, VCCI Class A, IEC950, EN60950, UL 1950/60950 third
	edition, CSA C22.2 No. 950

Server Ports

Number	16

Interface Types	PS/2, Sun and USB SAM modules

Connectors	RJ-45

Sync Types	Separate horizontal and vertical

Plug and Play	DDC2B

Video Resolution	Analog Port Maximum 1600 x 1280 @ 75 Hz

Conﬁguration Port

Number	1

Interface Type	Serial RS-232

Connector	DB9 Male

Analog Port

Number	2

Interface Types	PS/2 and VGA

Connectors	PS/2 MiniDIN and 15 pin D

Other Characteristics

Heat Dissipation	92 BTU/Hr

Airﬂow	8 cfm

Temperature	10º to 50º Celsius (50º to 122º Fahrenheit) operating
	-20º to 60º Celsius (-4º to 140º Fahrenheit) nonoperating

Humidity	20 to 80% noncondensing operating
	5 to 95% noncondensing nonoperating

Power	100 to 240 VAC (autosensing), 50 to 60 Hz, 40 W maximum

AC-input current rating	0.5 A

AC-input cable	18 AWG three-wire cable, with a three-lead IEC-320
	receptacle on the power supply end and a country or region
	dependent plug on the power resource end

Power Consumption	12.5 W

Size (HxWxD)	4.45 x 43.18 x 27.94 cm 1U form factor
	(1.75 x 17.00 x 11.00 in)

Weight	3.6 kg (8 lb) without cables

7

Image 9

Contents April Page Servswitch Family Welcome to the ServSwitch FamilyEuropean Union Declaration of Conformity Servselect II INSTALLER/USER GuideJapanese Compliance Statement Other Agency Approvals Compliance StatementsInstrucciones DE Seguridad Normas Oficiales Mexicanas NOM Electrical Safety StatementNOM Statement Contents Specifications SpecificationsServer Access Modules Features and BenefitsIntroduction Multiplatform supportIntroduction Example ServSelect II Configuration Safety PrecautionsRack mount safety considerations Getting Started InstallationRack Mounting Your ServSelect Supplied with the ServSelectTo install the 1U switch mounting bracket InstallationBasic ServSelect II Configuration Installing the ServSelectSetting Up Your ServSelect II System To connect an SAM to each serverTo connect local peripherals Basic Operations To access the Main dialog boxControlling Your System at the Analog Ports Viewing and Selecting Ports and ServersViewing the status of your appliance OSD Status SymbolsSelecting servers Basic OperationsSoft switching To conﬁgure servers for soft switchingTo soft switch to a server OSD Navigation Basics Navigating the OSDConfiguring the OSD Setup Features to Manage Routine Tasks for Your ServersTo access the Setup menu To access the Names dialog box Assigning server namesTo assign names to servers Assigning device types To access the Devices dialog boxTo access the Menu dialog box Changing the display behaviorTo assign a device type To choose the default display order of servers To set a Screen Delay Time for the OSDControlling the status flag To determine how the status ﬂag is displayed To access the Flag dialog boxSetting console security To access the Security dialog boxTo set or change the password To remove password protection from your console To password protect your consoleTo enable the screen saver mode with no password protection To log in to your consoleDisplaying Version Information To exit the screen saver modeTo turn off the screen saver To immediately turn on the screen saverClick X to close the SAM Version dialog box To add servers to the scan list Scanning Your SystemTo start the scan mode To cancel scan modeTo remove a server from the scan list Broadcasting to Servers To access the Broadcast dialog boxChanging Your Switch Mode To broadcast to selected serversTo turn broadcasting off To enable sharing To access the Switch dialog boxTroubleshooting TroubleshootingCalling Black BOX Shipping and PackagingPossible error conditions Flash UpgradesItems needed for the upgrade To upgrade ﬁrmwareFlash Upgrades To simultaneously upgrade multiple SAMsUpgrading the SAM firmware Version Dialog Box To upgrade SAM ﬁrmware individuallySAM Load Dialog Box Servselect II INSTALLER/USER Guide Page Page Page Doc. No -330-001A