Black Box KV2016A, KV2016E manual Installation, To install the 1U switch mounting bracket

Page 15

CHAPTER 3: INSTALLATION

Figure 3-1. ServSelect II Horizontal Installation

To install the 1U switch mounting bracket:

1.Remove the Þrst two screws on each side.

2.Line up the holes in the Òlong sideÓ of the kit s side brackets with the screw holes in the switch.

3.With a Phillips screwdriver, fasten the mounting brackets to the switch using two screws on each side.

4.Attach four cage nuts or clip nuts to the rack mounting ßange of the rack cabinet so that the nut is positioned on the inside of the rack.

NOTE:

Nuts are not included with the rack mount kit.

5.Mount the switch assembly to the rack cabinet by matching the holes in the Òshort sideÓ of each bracket to an appropriate set of matching holes on your rack cabinet. Next, insert the combination hex head screws through the slots in the bracket and the holes in the mounting rail, then into the cage nuts or clip nuts.

Image 15

Contents April Page Servswitch Family Welcome to the ServSwitch FamilyEuropean Union Declaration of Conformity Servselect II INSTALLER/USER GuideJapanese Compliance Statement Other Agency Approvals Compliance StatementsInstrucciones DE Seguridad Normas Oficiales Mexicanas NOM Electrical Safety StatementNOM Statement Contents Specifications SpecificationsMultiplatform support Features and BenefitsServer Access Modules IntroductionIntroduction Example ServSelect II Configuration Safety PrecautionsRack mount safety considerations Supplied with the ServSelect InstallationGetting Started Rack Mounting Your ServSelectTo install the 1U switch mounting bracket InstallationBasic ServSelect II Configuration Installing the ServSelectSetting Up Your ServSelect II System To connect an SAM to each serverTo connect local peripherals Viewing and Selecting Ports and Servers To access the Main dialog boxBasic Operations Controlling Your System at the Analog PortsBasic Operations OSD Status SymbolsViewing the status of your appliance Selecting serversSoft switching To conﬁgure servers for soft switchingTo soft switch to a server OSD Navigation Basics Navigating the OSDConfiguring the OSD Setup Features to Manage Routine Tasks for Your ServersTo access the Setup menu To access the Names dialog box Assigning server namesTo assign names to servers Assigning device types To access the Devices dialog boxTo access the Menu dialog box Changing the display behaviorTo assign a device type To choose the default display order of servers To set a Screen Delay Time for the OSDControlling the status flag To determine how the status ﬂag is displayed To access the Flag dialog boxSetting console security To access the Security dialog boxTo set or change the password To log in to your console To password protect your consoleTo remove password protection from your console To enable the screen saver mode with no password protectionTo immediately turn on the screen saver To exit the screen saver modeDisplaying Version Information To turn off the screen saverClick X to close the SAM Version dialog box To add servers to the scan list Scanning Your SystemTo start the scan mode To cancel scan modeTo remove a server from the scan list Broadcasting to Servers To access the Broadcast dialog boxChanging Your Switch Mode To broadcast to selected serversTo turn broadcasting off To enable sharing To access the Switch dialog boxShipping and Packaging TroubleshootingTroubleshooting Calling Black BOXTo upgrade ﬁrmware Flash UpgradesPossible error conditions Items needed for the upgradeFlash Upgrades To simultaneously upgrade multiple SAMsUpgrading the SAM firmware Version Dialog Box To upgrade SAM ﬁrmware individuallySAM Load Dialog Box Servselect II INSTALLER/USER Guide Page Page Page Doc. No -330-001A