Black Box KV2016E, KV2016A manual Installing the ServSelect, Basic ServSelect II Configuration

Page 16

SERVSELECT II™ INSTALLER/USER GUIDE

3.3 Installing the ServSelect II

Plug the supplied power cord into the back of the appliance and then into an appropriate power source. Figure 3-2 illustrates one possible configuration for your ServSelect appliance. See the following detailed set of procedures to successfully install your appliance.

Analog User B

Configuration Port

for updating firmware

ServSelect II Appliance

	1	3	5	7	9	11	13	15
2		4	6	8	10	12	14	16

Currently

Not Used

Servers 2-16

Analog User A

Sam Adaptor

PS/2 USB and Sun

adaptors are available

Figure 3-2. Basic ServSelect II Configuration

CAUTION:

Server 1

To reduce the risk of electric shock or damage to your equipment-

-Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

-Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.

-Disconnect the power from the unit by unplugging the power cord from either the electrical

outlet or the unit.

Image 16

Contents April Page Welcome to the ServSwitch Family Servswitch FamilyServselect II INSTALLER/USER Guide European Union Declaration of ConformityCompliance Statements Japanese Compliance Statement Other Agency ApprovalsNormas Oficiales Mexicanas NOM Electrical Safety Statement Instrucciones DE SeguridadNOM Statement Contents Specifications SpecificationsFeatures and Benefits Server Access ModulesIntroduction Multiplatform supportIntroduction Safety Precautions Example ServSelect II ConfigurationRack mount safety considerations Installation Getting StartedRack Mounting Your ServSelect Supplied with the ServSelectInstallation To install the 1U switch mounting bracketInstalling the ServSelect Basic ServSelect II ConfigurationTo connect an SAM to each server Setting Up Your ServSelect II SystemTo connect local peripherals To access the Main dialog box Basic OperationsControlling Your System at the Analog Ports Viewing and Selecting Ports and ServersOSD Status Symbols Viewing the status of your applianceSelecting servers Basic OperationsTo conﬁgure servers for soft switching Soft switchingTo soft switch to a server Navigating the OSD OSD Navigation BasicsSetup Features to Manage Routine Tasks for Your Servers Configuring the OSDTo access the Setup menu Assigning server names To access the Names dialog boxTo assign names to servers To access the Devices dialog box Assigning device typesChanging the display behavior To access the Menu dialog boxTo assign a device type To set a Screen Delay Time for the OSD To choose the default display order of serversControlling the status flag To access the Flag dialog box To determine how the status ﬂag is displayedTo access the Security dialog box Setting console securityTo set or change the password To password protect your console To remove password protection from your consoleTo enable the screen saver mode with no password protection To log in to your consoleTo exit the screen saver mode Displaying Version InformationTo turn off the screen saver To immediately turn on the screen saverClick X to close the SAM Version dialog box Scanning Your System To add servers to the scan listTo cancel scan mode To start the scan modeTo remove a server from the scan list To access the Broadcast dialog box Broadcasting to ServersTo broadcast to selected servers Changing Your Switch ModeTo turn broadcasting off To access the Switch dialog box To enable sharingTroubleshooting TroubleshootingCalling Black BOX Shipping and PackagingFlash Upgrades Possible error conditionsItems needed for the upgrade To upgrade ﬁrmwareTo simultaneously upgrade multiple SAMs Flash UpgradesUpgrading the SAM firmware To upgrade SAM ﬁrmware individually Version Dialog BoxSAM Load Dialog Box Servselect II INSTALLER/USER Guide Page Page Page Doc. No -330-001A