Black Box LB510A-R2 manual Operation, Power-Up, LED Status Monitors, DC Power

Page 26

Black Box G.SHDSL.bis EFM CPE

3.3.2 DC Power

The 36-60 VDC DC to DC adapter is supplied with the DC version of the LB510A-R2. The black and red leads plug into a DC source (nominal 48VDC) and the barrel power connector plugs into the barrel power supply jack on the LB510A-R2. (See Figure 5.)

To Power

Supply Jack

Barrel power connector

MADEINCHINABYSUNNY

:G01234567890S/N

OUTPUTPOWER:5WMAX

OUTPUT:+5V1.0A

INPUT:36-60V0.2AMAX

MODEL:SYD1106-0505

SWITCHINGPOWERSUPPLY

 

To -48VDC

-Vin

Source

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

+Vin

 

Black lead (-V)

Red lead (+V)

Figure 5. DC Power Supply

WARNING

There are no user-servicable parts in the power supply section of the LB510A-R2. Fuse replacement should only be performed by qualified service personnel. See Chapter .

4. OPERATION

Once the LB510A-R2 is properly configured and installed, it should operate transpar- ently. The following sections describe power-up and reading the LED status monitors.

4.1 POWER-UP

To apply power to the LB510A-R2, first be sure that you have read section “Power input connector” on page 11, and that the unit is connected to the appropriate power source. Power up the unit.

4.2 LED STATUS MONITORS

There are ten LEDs that provide feedback on the state of the unit. Figure 5 shows the location of the front panel LEDs. There is a description of each LED’s function follow- ing the figure.

Page 26

724-746-5500 blackbox.com

Image 26
Contents 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU Blackbox.com Table of ContentsBlack Box G.SHDSL.bis EFM CPE Table of Contents Ethernet Port Radio Frequency Interference Statements Radio Frequency Interference StatementsNormas Oficiales Mexicanas Electrical Safety Statement Instrucciones DE SeguridadInstrucciones DE Seguridad Safety When Working with Electricity Blackbox.com Description FeaturesGeneral Information Power Input Connector External AC universal power supplyHardware DIP-SWITCH Configuration ConfigurationSoftware CLI Configuration Configuration Configuring the DIP Switches LB510A-R2System Reset Mode DIP Switch Settings OFFOn CO 704 2816 Ethernet Management Port Help Commands DSL Line Condition Good or PoorDSL Configuration Commands System Configuration CommandsSystem Status Commands Example Command Line Interface Session DSL Status CommandDSL Clear Errcntrs Command Remote ConsoleSafety When Working With Electricity Installation Connecting the DSL InterfaceConnecting Power InstallationConnecting the Ethernet Interface Operation POWER-UPDC Power LED Status MonitorsDSL Green Power GreenOperation Link GreenTest Modes LoopbacksPatterns Remote console operationRemote Console Operation How to Connect Establishing a Remote Console SessionIs a screenshot of opening a typical remote console session How to Disconnect Differences in local and remote control session behaviorSoftware Upgrade Software UpgradeReset Configuration to Factory Defaults Reset configuration to factory defaults Configuration Power and Power Supply SpecificationsLine Rates DSL Line Transmission LineLine Coding Line InterfaceHumidity Temperature RangeDimensions AltitudeInterface Pinouts Line Port Ethernet PortReset configuration to factory defaults Blackbox.com

LB510A-R2, 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU specifications

The Black Box LB510A-R2 is a highly efficient two-wire extender and Network Termination Unit (NTU) designed to facilitate high-speed data transmission over existing copper wiring. Ideal for extending Ethernet signals, this device supports both 10BASE-T and 100BASE-TX Ethernet standards, making it versatile for various networking applications. With the growing demand for reliable and high-speed internet connections, the LB510A-R2 provides a cost-effective solution for businesses seeking to extend their networks without the need for extensive rewiring.

One of the standout features of the LB510A-R2 is its ability to operate using G.SHDSL technology, which allows for symmetric data transfer rates over twisted pair copper lines. This technology offers a significant advantage compared to traditional DSL methods, as it supports higher bandwidths and provides a more stable connection suitable for various applications, including VoIP, video conferencing, and online collaboration tools. The LB510A-R2 can achieve data rates up to 5.7 Mbps, depending on the line conditions, making it an excellent choice for businesses that require reliable and efficient communication.

The device supports a range of distances for transmission, effectively functioning over maximum distances of up to 12,000 feet (3,600 meters) with appropriate line conditions. This long-distance capability allows organizations to spread their network over extensive areas without sacrificing data integrity or speed. The LB510A-R2 includes built-in functionality to automatically adjust the line rate based on the actual conditions of the copper wires, ensuring optimal performance.

In terms of installation and management, the Black Box LB510A-R2 features an intuitive interface with LED indicators that provide real-time status updates for system monitoring. The compact design and rack-mountable option make it easy to integrate into existing network infrastructures, minimizing space requirements while maximizing performance.

In summary, the Black Box LB510A-R2 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU represents a robust solution for extending network capabilities with its advanced features, including G.SHDSL technology, extensive transmission distance, and user-friendly management. Whether for a small office or a large enterprise, this device is instrumental in ensuring seamless connectivity in an increasingly digital world.