Black Box 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU manual System Configuration Commands

Page 21

•dsl show errcntr help: Lists all the commands that start with dsl show errcntr that the console recognizes.

2.6.2 System Configuration Commands

The following commands allow the user to configure the system:

•system set password <password>: Sets the system password (1-10 charac- ters).

•system set circuitid <circuitid>: Sets the circuit ID (1-64 characters).

The following commands allow the user to view the current system configuration:

•system show config: Shows the configuration of the entire system, including the DSL line.

Any changes to the system configuration or the DSL configuration will be lost on the next power cycle unless the changes are saved. The command system save config is used to save the changes.

2.6.3 System Status Commands

The following commands show system status:

•system show status: Shows the following system status information: LEDs, DSL test mode, front panel switch settings, DSL link state, and configuration mode.

2.6.4 DSL Configuration Commands

The following commands are used to configure the DSL:

•dsl set timeslots <3-89>: the equation: data-rate =

Sets the DSL data rate. (The data rate is calculated by #timeslots x 64k.

•dsl set annex <ab>: Set the annex.

•dsl set lineprobe <enableddisabled>: Enable or disable line probe.

•dsl set mode <cocpe>: Set the CPE as local (CO) or remote (CPE).

724-746-5500 blackbox.com

Page 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU Table of Contents Black Box G.SHDSL.bis EFM CPEBlackbox.com Table of Contents Ethernet Port Radio Frequency Interference Statements Radio Frequency Interference StatementsInstrucciones DE Seguridad Normas Oficiales Mexicanas Electrical Safety StatementInstrucciones DE Seguridad Safety When Working with Electricity Blackbox.com Features General InformationDescription External AC universal power supply Power Input ConnectorConfiguration Software CLI ConfigurationHardware DIP-SWITCH Configuration Configuration LB510A-R2 Configuring the DIP SwitchesDIP Switch Settings OFF System Reset ModeOn CO 704 2816 Ethernet Management Port DSL Line Condition Good or Poor Help CommandsSystem Configuration Commands System Status CommandsDSL Configuration Commands DSL Clear Errcntrs Command DSL Status CommandExample Command Line Interface Session Remote ConsoleSafety When Working With Electricity Connecting the DSL Interface InstallationInstallation Connecting the Ethernet InterfaceConnecting Power DC Power POWER-UPOperation LED Status MonitorsOperation Power GreenDSL Green Link GreenLoopbacks Test ModesRemote console operation Remote Console OperationPatterns Establishing a Remote Console Session How to ConnectIs a screenshot of opening a typical remote console session Differences in local and remote control session behavior How to DisconnectSoftware Upgrade Software UpgradeReset Configuration to Factory Defaults Reset configuration to factory defaults Power and Power Supply Specifications ConfigurationLine Coding Transmission LineLine Rates DSL Line Line InterfaceDimensions Temperature RangeHumidity AltitudeEthernet Port Interface Pinouts Line PortReset configuration to factory defaults Blackbox.com

LB510A-R2, 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU specifications

The Black Box LB510A-R2 is a highly efficient two-wire extender and Network Termination Unit (NTU) designed to facilitate high-speed data transmission over existing copper wiring. Ideal for extending Ethernet signals, this device supports both 10BASE-T and 100BASE-TX Ethernet standards, making it versatile for various networking applications. With the growing demand for reliable and high-speed internet connections, the LB510A-R2 provides a cost-effective solution for businesses seeking to extend their networks without the need for extensive rewiring.

One of the standout features of the LB510A-R2 is its ability to operate using G.SHDSL technology, which allows for symmetric data transfer rates over twisted pair copper lines. This technology offers a significant advantage compared to traditional DSL methods, as it supports higher bandwidths and provides a more stable connection suitable for various applications, including VoIP, video conferencing, and online collaboration tools. The LB510A-R2 can achieve data rates up to 5.7 Mbps, depending on the line conditions, making it an excellent choice for businesses that require reliable and efficient communication.

The device supports a range of distances for transmission, effectively functioning over maximum distances of up to 12,000 feet (3,600 meters) with appropriate line conditions. This long-distance capability allows organizations to spread their network over extensive areas without sacrificing data integrity or speed. The LB510A-R2 includes built-in functionality to automatically adjust the line rate based on the actual conditions of the copper wires, ensuring optimal performance.

In terms of installation and management, the Black Box LB510A-R2 features an intuitive interface with LED indicators that provide real-time status updates for system monitoring. The compact design and rack-mountable option make it easy to integrate into existing network infrastructures, minimizing space requirements while maximizing performance.

In summary, the Black Box LB510A-R2 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU represents a robust solution for extending network capabilities with its advanced features, including G.SHDSL technology, extensive transmission distance, and user-friendly management. Whether for a small office or a large enterprise, this device is instrumental in ensuring seamless connectivity in an increasingly digital world.
Top Page Image Contents