Black Box 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU, LB510A-R2 manual Software Upgrade

Page 33

Software Upgrade

Figure 12. Remote control session with LAL diagram

dsl set loopback lal: do not issue this command over the RCS to the far-end LB510A-R2. if the far-end goes into Local Analog Loopback (LAL), the near-end and far-end LB510A-R2 NTU’s can no longer communicate over the RCS.

WARNING

Do not issue this command to a far-end unit. if you were to do so, the near-end LB510A-R2 would no longer be able to communicate with the far-end LB510A-R2.

6. SOFTWARE UPGRADE

The software upgrade feature is available through BOOTP/TFTP. The software upgrade takes approximately 2-3 minutes to complete. To upgrade the software:

1.Connect to the LB510A-R2 via the Ethernet management port and a Telnet ses- sion.

2.Enter the system show info command to view the unit’s MAC address.

3.Configure a BOOTP/TFTP server and enter the system upgrade / yes command to begin the upgrade.

4.Alternatively, you may enter the system upgrade <TFTP server IP address>:/<filename> command to begin the upgrade.

After approximately 2-3 minutes, the LB510A-R2 will operate with the upgraded soft- ware.

724-746-5500 blackbox.com

Page 33

Image 33
Contents 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU Table of Contents Black Box G.SHDSL.bis EFM CPEBlackbox.com Table of Contents Ethernet Port Radio Frequency Interference Statements Radio Frequency Interference StatementsInstrucciones DE Seguridad Normas Oficiales Mexicanas Electrical Safety StatementInstrucciones DE Seguridad Safety When Working with Electricity Blackbox.com Features General InformationDescription External AC universal power supply Power Input ConnectorConfiguration Software CLI ConfigurationHardware DIP-SWITCH Configuration Configuration LB510A-R2 Configuring the DIP SwitchesDIP Switch Settings OFF System Reset ModeOn CO 704 2816 Ethernet Management Port DSL Line Condition Good or Poor Help CommandsSystem Configuration Commands System Status CommandsDSL Configuration Commands DSL Clear Errcntrs Command DSL Status CommandExample Command Line Interface Session Remote ConsoleSafety When Working With Electricity Connecting the DSL Interface InstallationInstallation Connecting the Ethernet InterfaceConnecting Power DC Power POWER-UPOperation LED Status MonitorsOperation Power GreenDSL Green Link GreenLoopbacks Test ModesRemote console operation Remote Console OperationPatterns Establishing a Remote Console Session How to ConnectIs a screenshot of opening a typical remote console session Differences in local and remote control session behavior How to DisconnectSoftware Upgrade Software UpgradeReset Configuration to Factory Defaults Reset configuration to factory defaults Power and Power Supply Specifications ConfigurationLine Coding Transmission LineLine Rates DSL Line Line InterfaceDimensions Temperature RangeHumidity AltitudeEthernet Port Interface Pinouts Line PortReset configuration to factory defaults Blackbox.com

LB510A-R2, 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU specifications

The Black Box LB510A-R2 is a highly efficient two-wire extender and Network Termination Unit (NTU) designed to facilitate high-speed data transmission over existing copper wiring. Ideal for extending Ethernet signals, this device supports both 10BASE-T and 100BASE-TX Ethernet standards, making it versatile for various networking applications. With the growing demand for reliable and high-speed internet connections, the LB510A-R2 provides a cost-effective solution for businesses seeking to extend their networks without the need for extensive rewiring.

One of the standout features of the LB510A-R2 is its ability to operate using G.SHDSL technology, which allows for symmetric data transfer rates over twisted pair copper lines. This technology offers a significant advantage compared to traditional DSL methods, as it supports higher bandwidths and provides a more stable connection suitable for various applications, including VoIP, video conferencing, and online collaboration tools. The LB510A-R2 can achieve data rates up to 5.7 Mbps, depending on the line conditions, making it an excellent choice for businesses that require reliable and efficient communication.

The device supports a range of distances for transmission, effectively functioning over maximum distances of up to 12,000 feet (3,600 meters) with appropriate line conditions. This long-distance capability allows organizations to spread their network over extensive areas without sacrificing data integrity or speed. The LB510A-R2 includes built-in functionality to automatically adjust the line rate based on the actual conditions of the copper wires, ensuring optimal performance.

In terms of installation and management, the Black Box LB510A-R2 features an intuitive interface with LED indicators that provide real-time status updates for system monitoring. The compact design and rack-mountable option make it easy to integrate into existing network infrastructures, minimizing space requirements while maximizing performance.

In summary, the Black Box LB510A-R2 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU represents a robust solution for extending network capabilities with its advanced features, including G.SHDSL technology, extensive transmission distance, and user-friendly management. Whether for a small office or a large enterprise, this device is instrumental in ensuring seamless connectivity in an increasingly digital world.