Black Box LB510A-R2 manual Safety When Working with Electricity

Page 8

Black Box G.SHDSL.bis EFM CPE

SAFETY WHEN WORKING WITH ELECTRICITY

 

• This device contains no user serviceable parts. This

 

device can only be repaired by qualified service personnel.

WARNING

• Do not open the device when the power cord is connected.

 

For systems without a power switch and without an external

 

power adapter, line voltages are present within the device

 

when the power cord is connected.

 

• For devices with an external power adapter, the power

 

adapter shall be a listed Limited Power Source. The mains

 

outlet that is utilized to power the device shall be within 10

 

feet (3 meters) of the device, shall be easily accessible, and

 

protected by a circuit breaker in compliance with local regu-

 

latory requirements.

 

• For AC powered devices, ensure that the power cable

 

used meets all applicable standards for the country in

 

which it is to be installed.

 

• For AC powered devices which have 3 conductor power

 

plugs (L1, L2 & GND or Hot, Neutral & Safety/Protective

 

Ground), the wall outlet (or socket) must have an earth

 

ground.

 

• For DC powered devices, ensure that the interconnecting

 

cables are rated for proper voltage, current, anticipated

 

temperature, flammability, and mechanical serviceability.

 

• WAN, LAN & PSTN ports (connections) may have hazard-

 

ous voltages present regardless of whether the device is

 

powered ON or OFF. PSTN relates to interfaces such as

 

telephone lines, FXS, FXO, DSL, xDSL, T1, E1, ISDN, Voice,

 

etc. These are known as “hazardous network voltages” and

 

to avoid electric shock use caution when working near

 

these ports. When disconnecting cables for these ports,

 

detach the far end connection first.

 

• Do not work on the device or connect or disconnect

 

cables during periods of lightning activity.

 

 

Page 8

724-746-5500 blackbox.com

Image 8
Contents 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU Blackbox.com Table of ContentsBlack Box G.SHDSL.bis EFM CPE Table of Contents Ethernet Port Radio Frequency Interference Statements Radio Frequency Interference StatementsNormas Oficiales Mexicanas Electrical Safety Statement Instrucciones DE SeguridadInstrucciones DE Seguridad Safety When Working with Electricity Blackbox.com Description FeaturesGeneral Information Power Input Connector External AC universal power supplyHardware DIP-SWITCH Configuration ConfigurationSoftware CLI Configuration Configuration Configuring the DIP Switches LB510A-R2System Reset Mode DIP Switch Settings OFFOn CO 704 2816 Ethernet Management Port Help Commands DSL Line Condition Good or PoorDSL Configuration Commands System Configuration CommandsSystem Status Commands DSL Status Command DSL Clear Errcntrs CommandExample Command Line Interface Session Remote ConsoleSafety When Working With Electricity Installation Connecting the DSL InterfaceConnecting Power InstallationConnecting the Ethernet Interface POWER-UP DC PowerOperation LED Status MonitorsPower Green OperationDSL Green Link GreenTest Modes LoopbacksPatterns Remote console operationRemote Console Operation How to Connect Establishing a Remote Console SessionIs a screenshot of opening a typical remote console session How to Disconnect Differences in local and remote control session behaviorSoftware Upgrade Software UpgradeReset Configuration to Factory Defaults Reset configuration to factory defaults Configuration Power and Power Supply SpecificationsTransmission Line Line CodingLine Rates DSL Line Line InterfaceTemperature Range DimensionsHumidity AltitudeInterface Pinouts Line Port Ethernet PortReset configuration to factory defaults Blackbox.com

LB510A-R2, 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU specifications

The Black Box LB510A-R2 is a highly efficient two-wire extender and Network Termination Unit (NTU) designed to facilitate high-speed data transmission over existing copper wiring. Ideal for extending Ethernet signals, this device supports both 10BASE-T and 100BASE-TX Ethernet standards, making it versatile for various networking applications. With the growing demand for reliable and high-speed internet connections, the LB510A-R2 provides a cost-effective solution for businesses seeking to extend their networks without the need for extensive rewiring.

One of the standout features of the LB510A-R2 is its ability to operate using G.SHDSL technology, which allows for symmetric data transfer rates over twisted pair copper lines. This technology offers a significant advantage compared to traditional DSL methods, as it supports higher bandwidths and provides a more stable connection suitable for various applications, including VoIP, video conferencing, and online collaboration tools. The LB510A-R2 can achieve data rates up to 5.7 Mbps, depending on the line conditions, making it an excellent choice for businesses that require reliable and efficient communication.

The device supports a range of distances for transmission, effectively functioning over maximum distances of up to 12,000 feet (3,600 meters) with appropriate line conditions. This long-distance capability allows organizations to spread their network over extensive areas without sacrificing data integrity or speed. The LB510A-R2 includes built-in functionality to automatically adjust the line rate based on the actual conditions of the copper wires, ensuring optimal performance.

In terms of installation and management, the Black Box LB510A-R2 features an intuitive interface with LED indicators that provide real-time status updates for system monitoring. The compact design and rack-mountable option make it easy to integrate into existing network infrastructures, minimizing space requirements while maximizing performance.

In summary, the Black Box LB510A-R2 10BASE-T/100BASE-TX G.SHDSL Two-Wire Extender/NTU represents a robust solution for extending network capabilities with its advanced features, including G.SHDSL technology, extensive transmission distance, and user-friendly management. Whether for a small office or a large enterprise, this device is instrumental in ensuring seamless connectivity in an increasingly digital world.