Black Box ACS235A, ACS236A manual Jumper Settings

Page 16

CHAPTER 3: Configuring the ACS235A

Table 3-1. Jumper Settings

For all of these applications, to use AGC you must leave JP3 in the Local Module installed and keep the JP8 jumpers in the Remote Module on the left-hand posts. To operate without AGC, remove JP3 in the Local Module installed, move the JP8 jumpers in the Remote Module to the right-hand posts, and use the Remote Module’s gain-control screwdials as necessary (see Sections 3.2.3, 3.3.2, and 5.2).

	LOCAL				Standard VGA	Standard VGA	RGB Source	RGB Source
	LOCAL				Source to Std.	Source to	to Standard	to
	MODULE				Source to Std.	Source to	to Standard	to
	MODULE				VGA Monitor	RGB Monitor	VGA Monitor	RGB Monitor
	JUMPERS:				VGA Monitor	RGB Monitor	VGA Monitor	RGB Monitor
	JUMPERS:

				JP2	Installed	Removed	Installed	Installed

				JP6	Removed	Removed	Installed	Installed

				JP10	Removed	Removed	Installed	Installed

				JP11	Installed on	Installed on	Installed on	Installed on
					left-hand	left-hand	right-hand	right-hand
					posts	posts	posts	posts

	PINS 13 & 14				Connected	Connected	Open	Open
	(HS, VS)
	FROM CPU

	REMOTE-
	MODULE
	JUMPERS:
			JP1, 2, 3		Removed	Installed	Removed	Installed

				JP9	Installed	Removed	Installed	Removed

				JP12	Installed	Removed	Removed	Removed

	PINS 13 & 14				Connected	Open	Connected	Open
	(HS, VS)
	TO MONITOR

	USE RM’S
	CONTROLS?

			Contrast		If necessary	If necessary	If necessary	If necessary

			Brightness		No	If necessary	No	If necessary

15

Image 16

Contents ACS235A ACS236A Welcome to the ServSwitchTM Family Servswitch Brand Fiber KVM Extenders RADIO-FREQUENCY Interference Statements Servswitch Brand Fiber KVM Extenders NOM Statement Contents Table of Contents Specifications CableSpecifications Temperature Introduction Overview Complete Package Configuring the ACS235A Configuring for RGB VideoImportant Notes Jumper Settings Setting the Jumpers in the Local Module Optional Locations of the ACS235A Local Module’s jumpersSetting the VGA/RGB jumpers Setting VGA-to-RGB jumper JP2 Setting the Jumpers in the Remote Module Optional Locations of the ACS235A Remote Module’s jumpersSync-on-color jumpers and diodes Setting gain-control jumper bank JP8 Setting Vsync jumper JP9 Configuring the ACS236A Locations of the ACS236A Local Module’s jumpers Setting video-handling jumpers JP2 and JP10 Locations of the ACS236A Remote Module’s jumpers Setting gain-control jumper bank JP8 Setting Vsync jumper JP9 Installation Guidelines and Limitations for Attaching Equipment1 CPU Keyboard and Mouse Connecting a CPU or KVM Switch to the Local Module Installation Servswitch Brand Fiber KVM Extenders Installation Running Fiber Cable Between the Local and Remote Modules Connecting Power to the Local and Remote Modules Powering Up the Rest of the SystemOperation Interpreting the Remote Module’s 7-Segment DisplayOperation Servswitch Brand Fiber KVM Extenders Troubleshooting Things to Try FirstCalling Black Box Shipping and PackagingConnectors on Both Models Appendix a PinoutsConnectors on the ACS235A Pin Signal Direction Connectors on the ACS236A Signal PinSignal Direction Appendix B Rackmounting the Extender Figure B-1. The RMK235 Rackmount KitFigure B-2. The rackmount assembly RMK235 shown Customer Support Information Welcome to the ServSwitchTM Family Servswitch Brand Fiber KVM Extenders RADIO-FREQUENCY Interference Statements Servswitch Brand Fiber KVM Extenders NOM Statement Contents Table of Contents Specifications Specifications Connectors ACS236A Introduction Complete Package Configuring the ACS235A Important Notes Jumper Settings Setting the Jumpers in the Local Module Optional Setting the VGA/RGB jumpers Setting VGA-to-RGB jumper JP2 Setting the Jumpers in the Remote Module Optional Sync-on-color jumpers and diodes Setting gain-control jumper bank JP8 Setting Vsync jumper JP9 Configuring the ACS236A Locations of the ACS236A Local Module’s jumpers Setting video-handling jumpers JP2 and JP10 Setting the Jumpers in the Remote Module Optional Setting gain-control jumper bank JP8 Setting Vsync jumper JP9 Installation 1 CPU Keyboard and Mouse Connecting a CPU or KVM Switch to the Local Module Installation Servswitch Brand Fiber KVM Extenders Installation Running Fiber Cable Between the Local and Remote Modules Connecting Power to the Local and Remote Modules Operation Operation Servswitch Brand Fiber KVM Extenders Troubleshooting Calling Black Box Appendix a Pinouts Connectors on the ACS235A Pin Signal Direction Connectors on the ACS236A Signal Direction Appendix B Rackmounting the Extender Figure B-2. The rackmount assembly RMK235 shown Page