Black Box ACS235A, ACS236A manual Connecting Power to the Local and Remote Modules

Page 88

CHAPTER 5: Installation

CAUTION!

One of the most common errors in cabling the Extender is to attach fiber strands “1” and “2” to the Remote Module backwards (strand 1 to port 2, strand 2 to port 1). Notice that while the fiber ports on the Local Module are arranged in left-to-right order as “R,” “G,” “B,” “1,” and “2,” the ports on the Remote Module are arranged in the order “R,” “G,” “B,” “2,” and “1”.

5.5 Connecting Power to the Local and Remote Modules

The ServSwitch Brand Fiber KVM Extender comes with a pair of identical autosensing power supplies. Take these steps to attach them to your Extender’s Local and Remote Modules:

1.Attach input cords to the IEC 320 male power inlets on the two power supplies’ transformers. (This cord will be included for North American customers; other customers might have to get a cord appropriate for their local outlets.)

2.Attach the transformers’ output cords to the 6-pin DIN connectors on the Local and Remote Modules (the connectors labeled “Power”).

3.Plug the input cords into a standard utility-power (mains) outlet providing between 100 and 240 volts of AC power.

The Extender units will begin operating immediately; they don’t have ON/OFF switches.

5.6 Powering Up the Rest of the System

To power up the other devices attached to the Extender units, take these steps:

1.Plug in and turn ON the monitor.

2.Plug in and turn ON the CPU. It should boot normally.

This completes the installation of your ServSwitch Brand Fiber KVM Extender system. It should be ready for continuous operation.

37

Page 87 Page 89
Image 88
Page 87 Page 89
Contents ACS235A ACS236A Welcome to the ServSwitchTM Family Servswitch Brand Fiber KVM Extenders RADIO-FREQUENCY Interference Statements Servswitch Brand Fiber KVM Extenders NOM Statement Contents Table of Contents Specifications CableSpecifications Temperature Introduction OverviewComplete Package Configuring the ACS235A Configuring for RGB VideoImportant Notes Jumper Settings Setting the Jumpers in the Local Module Optional Locations of the ACS235A Local Module’s jumpersSetting the VGA/RGB jumpers Setting VGA-to-RGB jumper JP2 Setting the Jumpers in the Remote Module Optional Locations of the ACS235A Remote Module’s jumpersSync-on-color jumpers and diodes Setting gain-control jumper bank JP8 Setting Vsync jumper JP9 Configuring the ACS236A Locations of the ACS236A Local Module’s jumpers Setting video-handling jumpers JP2 and JP10 Locations of the ACS236A Remote Module’s jumpers Setting gain-control jumper bank JP8 Setting Vsync jumper JP9 Installation Guidelines and Limitations for Attaching Equipment1 CPU Keyboard and Mouse Connecting a CPU or KVM Switch to the Local Module Installation Servswitch Brand Fiber KVM Extenders Installation Running Fiber Cable Between the Local and Remote Modules Connecting Power to the Local and Remote Modules Powering Up the Rest of the SystemOperation Interpreting the Remote Module’s 7-Segment DisplayOperation Servswitch Brand Fiber KVM Extenders Troubleshooting Things to Try FirstCalling Black Box Shipping and PackagingConnectors on Both Models Appendix a PinoutsConnectors on the ACS235A Pin Signal Direction Connectors on the ACS236A Signal PinSignal Direction Appendix B Rackmounting the Extender Figure B-1. The RMK235 Rackmount KitFigure B-2. The rackmount assembly RMK235 shown Customer Support Information Welcome to the ServSwitchTM Family Servswitch Brand Fiber KVM Extenders RADIO-FREQUENCY Interference Statements Servswitch Brand Fiber KVM Extenders NOM Statement Contents Table of Contents Specifications Specifications Connectors ACS236A Introduction Complete Package Configuring the ACS235A Important Notes Jumper Settings Setting the Jumpers in the Local Module Optional Setting the VGA/RGB jumpers Setting VGA-to-RGB jumper JP2 Setting the Jumpers in the Remote Module Optional Sync-on-color jumpers and diodes Setting gain-control jumper bank JP8 Setting Vsync jumper JP9 Configuring the ACS236A Locations of the ACS236A Local Module’s jumpers Setting video-handling jumpers JP2 and JP10 Setting the Jumpers in the Remote Module Optional Setting gain-control jumper bank JP8 Setting Vsync jumper JP9 Installation 1 CPU Keyboard and Mouse Connecting a CPU or KVM Switch to the Local Module Installation Servswitch Brand Fiber KVM Extenders Installation Running Fiber Cable Between the Local and Remote Modules Connecting Power to the Local and Remote Modules Operation Operation Servswitch Brand Fiber KVM Extenders Troubleshooting Calling Black Box Appendix a Pinouts Connectors on the ACS235A Pin Signal Direction Connectors on the ACS236A Signal Direction Appendix B Rackmounting the Extender Figure B-2. The rackmount assembly RMK235 shown Page

ACS236A, ACS235A specifications

The Black Box ACS235A and ACS236A are advanced video and audio extenders designed to facilitate the transmission of high-quality multimedia signals over long distances, utilizing standard Ethernet infrastructure. These devices are essential for professional audio-video applications, such as conference rooms, classrooms, and broadcast studios, where reliable and high-definition signal distribution is crucial.

One of the standout features of the ACS235A and ACS236A is their support for high-definition video formats, including 1080p and 4K resolutions. This capability ensures that users can experience stunning visuals without degradation, even when transmitting over extensive distances. Both models utilize HDBaseT technology, which enables the transmission of uncompressed HD video, audio, control signals, and power over a single Cat5e/6 cable. This simplifies installation and reduces cabling costs while providing exceptional performance.

The ACS235A is equipped with HDMI input and output, making it ideal for connecting a variety of devices such as projectors, monitors, and media players. Its compact design allows for easy integration into existing setups without occupying excessive space. Additionally, it supports Power over Ethernet (PoE), meaning that it can receive power through the same cable that carries the data, enhancing flexibility in deployment.

Similarly, the ACS236A provides comprehensive support for audio and video formats and includes additional features such as RS-232 and IR control. This capability allows users to manage their equipment remotely, making it easier to control presentations or switch between multiple sources. The built-in LED indicators provide real-time status updates, making it simpler for users to monitor the system’s operation.

Both models are designed with durability in mind, incorporating robust housings and reliable connectors that ensure longevity even in demanding environments. Furthermore, they both support a wide range of operating temperatures, making them suitable for various installations, from corporate settings to educational institutions.

In summary, the Black Box ACS235A and ACS236A are powerful audio-video extenders that combine advanced technology with user-friendly features. Their ability to deliver high-quality signals over significant distances, along with remote control capabilities and efficient designs, makes them an excellent choice for anyone looking to enhance their multimedia installations.
Top Page Image Contents