SERVSWITCH™ BRAND FIBER KVM EXTENDERS
Appendix B:
Rackmounting the Extender
If you want to mount one or two ServSwitch™ Brand Fiber KVM Extender Local or Remote Modules in a standard 19" equipment rack, you can use the
Figure B-1. The RMK235 Rackmount Kit.
Each of these Kits consists of a single rackmounting frame, two handles, four
1.Using a
2.Unscrew and remove two screws from each side of the case of the Module you want to mount:
•If you want the
•If you want the
3.Insert the Module into the Kit frame from behind, through the matching hole (or, on the Dual Kit, either matching hole); the end of the Module that you removed the screws from in step 2 must go in first. Match up those now- vacant screwholes in the sides of the Module with the holes in the two small flanges welded to the back of the Kit frame.
48