Black Box ACS236A, ACS235A manual Setting VGA-to-RGB jumper JP2

Page 69

SERVSWITCH™ BRAND FIBER KVM EXTENDERS

3.2.2VGA-TO-RGBSYNC-GENERATION JUMPER JP2

For most applications you should leave this jumper installed. However, if you are using the Extender to connect a VGA video card or other VGA source to an RGB monitor, remove this jumper as shown in Figure 3-3. (This causes the Local Module to generate a CSYNC signal for transmission to the Remote Module.)

Use existing sync

VGA to RGB

(factory default)

(create CSYNC)

JP2

InstalledRemoved

Figure 3-3. Setting VGA-to-RGB jumper JP2.

3.2.3LOCAL GAIN-CONTROL JUMPER JP3

If you’ll be using automatic gain control (AGC) in your Extender system, leave the jumper ON the JP3 jumper posts. (We recommend this factory-default setting.) But if you’ll be controlling the gain manually (see Section 5.2), remove the jumper from these posts as shown in Figure 3-4. (Whichever way you set this jumper, make sure that jumper JP8 in the Remote Module is set the same way.)

With AGC

Without AGC

(factory default)

 

JP3

InstalledRemoved

Figure 3-4. Setting gain-control jumper JP3.

3.2.4CORE-DIAMETER JUMPER JP5

If you’ll be using fiberoptic cable with a 62.5/125-µm diameter in your Extender system, leave the JP5 jumper posts empty. (This is the factory-default setting.) But if you’ll be using 50/125-µm-diameter cable, install a jumper on these posts as shown in Figure 3-5. The Extender does not work with fiber cables of any other diameter.

62.5/125-µm50/125-µm (factory default)

JP5

RemovedInstalled

Figure 3-5. Setting core-diameter jumper JP5.

18

Page 68 Page 70
Image 69
Page 68 Page 70
Contents ACS235A ACS236A Welcome to the ServSwitchTM Family Servswitch Brand Fiber KVM Extenders RADIO-FREQUENCY Interference Statements Servswitch Brand Fiber KVM Extenders NOM Statement Contents Table of Contents Cable SpecificationsSpecifications Temperature Overview IntroductionComplete Package Configuring for RGB Video Configuring the ACS235AImportant Notes Jumper Settings Locations of the ACS235A Local Module’s jumpers Setting the Jumpers in the Local Module OptionalSetting the VGA/RGB jumpers Setting VGA-to-RGB jumper JP2 Locations of the ACS235A Remote Module’s jumpers Setting the Jumpers in the Remote Module OptionalSync-on-color jumpers and diodes Setting gain-control jumper bank JP8 Setting Vsync jumper JP9 Configuring the ACS236A Locations of the ACS236A Local Module’s jumpers Setting video-handling jumpers JP2 and JP10 Locations of the ACS236A Remote Module’s jumpers Setting gain-control jumper bank JP8 Setting Vsync jumper JP9 Guidelines and Limitations for Attaching Equipment Installation1 CPU Keyboard and Mouse Connecting a CPU or KVM Switch to the Local Module Installation Servswitch Brand Fiber KVM Extenders Installation Running Fiber Cable Between the Local and Remote Modules Powering Up the Rest of the System Connecting Power to the Local and Remote ModulesInterpreting the Remote Module’s 7-Segment Display OperationOperation Servswitch Brand Fiber KVM Extenders Things to Try First TroubleshootingShipping and Packaging Calling Black BoxAppendix a Pinouts Connectors on Both ModelsConnectors on the ACS235A Pin Signal Direction Signal Pin Connectors on the ACS236ASignal Direction Figure B-1. The RMK235 Rackmount Kit Appendix B Rackmounting the ExtenderFigure B-2. The rackmount assembly RMK235 shown Customer Support Information Welcome to the ServSwitchTM Family Servswitch Brand Fiber KVM Extenders RADIO-FREQUENCY Interference Statements Servswitch Brand Fiber KVM Extenders NOM Statement Contents Table of Contents Specifications Specifications Connectors ACS236A Introduction Complete Package Configuring the ACS235A Important Notes Jumper Settings Setting the Jumpers in the Local Module Optional Setting the VGA/RGB jumpers Setting VGA-to-RGB jumper JP2 Setting the Jumpers in the Remote Module Optional Sync-on-color jumpers and diodes Setting gain-control jumper bank JP8 Setting Vsync jumper JP9 Configuring the ACS236A Locations of the ACS236A Local Module’s jumpers Setting video-handling jumpers JP2 and JP10 Setting the Jumpers in the Remote Module Optional Setting gain-control jumper bank JP8 Setting Vsync jumper JP9 Installation 1 CPU Keyboard and Mouse Connecting a CPU or KVM Switch to the Local Module Installation Servswitch Brand Fiber KVM Extenders Installation Running Fiber Cable Between the Local and Remote Modules Connecting Power to the Local and Remote Modules Operation Operation Servswitch Brand Fiber KVM Extenders Troubleshooting Calling Black Box Appendix a Pinouts Connectors on the ACS235A Pin Signal Direction Connectors on the ACS236A Signal Direction Appendix B Rackmounting the Extender Figure B-2. The rackmount assembly RMK235 shown Page

ACS236A, ACS235A specifications

The Black Box ACS235A and ACS236A are advanced video and audio extenders designed to facilitate the transmission of high-quality multimedia signals over long distances, utilizing standard Ethernet infrastructure. These devices are essential for professional audio-video applications, such as conference rooms, classrooms, and broadcast studios, where reliable and high-definition signal distribution is crucial.

One of the standout features of the ACS235A and ACS236A is their support for high-definition video formats, including 1080p and 4K resolutions. This capability ensures that users can experience stunning visuals without degradation, even when transmitting over extensive distances. Both models utilize HDBaseT technology, which enables the transmission of uncompressed HD video, audio, control signals, and power over a single Cat5e/6 cable. This simplifies installation and reduces cabling costs while providing exceptional performance.

The ACS235A is equipped with HDMI input and output, making it ideal for connecting a variety of devices such as projectors, monitors, and media players. Its compact design allows for easy integration into existing setups without occupying excessive space. Additionally, it supports Power over Ethernet (PoE), meaning that it can receive power through the same cable that carries the data, enhancing flexibility in deployment.

Similarly, the ACS236A provides comprehensive support for audio and video formats and includes additional features such as RS-232 and IR control. This capability allows users to manage their equipment remotely, making it easier to control presentations or switch between multiple sources. The built-in LED indicators provide real-time status updates, making it simpler for users to monitor the system’s operation.

Both models are designed with durability in mind, incorporating robust housings and reliable connectors that ensure longevity even in demanding environments. Furthermore, they both support a wide range of operating temperatures, making them suitable for various installations, from corporate settings to educational institutions.

In summary, the Black Box ACS235A and ACS236A are powerful audio-video extenders that combine advanced technology with user-friendly features. Their ability to deliver high-quality signals over significant distances, along with remote control capabilities and efficient designs, makes them an excellent choice for anyone looking to enhance their multimedia installations.
Top Page Image Contents