Fujitsu XG2000 manual Parts List

Page 17

•Rack Mounting Brackets Brackets for mounting the XG2000 in a rack. Attach each rack mounting bracket to the right and left sides of the XG2000, and fasten to the rack posts with the rack screws (large).

•Rack Mounting Bracket B

		A bracket for mounting the XG2000 in a rack. Attach the rack
		mounting bracket B to the back-right and back-left sides of the	1
		XG2000, and fasten to the rail (attached to the back-right rack
		post) with the rack screws (small).
•	Rail R	A rail that are attached to the back-right rack post and into
		which the back rack mounting bracked are slid and fastened
		when mounting the XG2000 in a rack.
•	Rail L	A rail that are attached to the back-left rack post and into which
		the back rack mounting bracked are slid and fastened when
		mounting the XG2000 in a rack.
•	Rack Nuts	When the rack post holes are round, use the rack nuts to fas-
		ten the XG2000 and the rails to the rack posts with the rack
		screws (large).
•	Cage Nuts	When the rack post holes are square, use the rack nuts to fas-
		ten the XG2000 and the rails to the rack posts with the rack
		screws (large).
•	Rack Screws (Small)	Flat-head screws for fixing the rack mounting brackets and
		rack mounting bracket B to the XG2000, and fixing the rack
		mounting bracket B to the rails.
•	Rack Screws (Large)	Pan-head screws for fixing the XG2000 and the rails to the
		rack posts.

Parts List

15

Image 17

Contents XG2000 Hardware Guide Page Preface For Safe Use of the XG2000 For Safe Use of the XG2000Not used properly XG2000 is not used properly For security No self maintenanceSafety precautions Electromagnetic compatibility USA SafetyElectromagnetic compatibility Canada Electromagnetic compatibility EULaser safety High safetyTargeted reader and expected knowledge About This ManualOrganization Related manualsProduct Information Symbols used in this manualTrademarks and abbreviations used in this manual About This Manual Contents Chapter Troubleshooting Installation CD-ROM 1Parts ListParts List XG2000 front 2XG2000 ComponentsXG2000 rear LED Display LEDs3Labels CSA/CE Label FCC LabelFCC Canada Label MAC Label Product nameplateProduct ID Label Xxxxxxxxxxxx+14 Installation and Operation 1Installation Overview Space requirements 2Installation ProcedureInstallation requirements Take the XG2000 out of its box Installing the XG2000 in a rackSet up requirements Fix the nuts and rails to the rack posts When the rack has round post holes top of viewWhen the rack has round post holes Slide the XG2000 into the rack and fasten it in place Fix the four rack mounting brackets to the XG2000Slide the XG2000 forward, and remove it from the rack Uninstalling the XG2000 from a rackThis completes the rack installation procedure Install the XPF module in the XG2000 3Installation of XFP modulesInstalling the XFP modules Uninstall the XPF module from the XG2000 Uninstalling the XFP modulesConnect the fiber optic cables to the XG2000 Connecting the fiber optic cables4Cable Connection Connect the power cords to the XG2000 Connecting the power cordsTurning the XG2000 off 5Basic OperationTurning the XG2000 on Installation and Operation Troubleshooting Alarm LED lights, but the XG2000 does not start up 1Start-up ProblemsXG2000 does not turn on Status LED blinks, but the XG2000 does not start up2Hardware Problems Troubleshooting Appendix Installation Specifications Appendix-ASpecificationsProduct Specifications XG2000 Hardware Guide