No self maintenance
Never attempt to dismantle or modify the XG2000 yourself. This is extremely dangerous since the XG2000 includes both high voltage and high temperature components.
If maintenance is required, contact the vendor's service department.
Warning label
The following warning label may be found on the top of XG2000. Do not attempt to remove this warning label. If you cannot read the details written in the warning label because of dirt or wear, contact the vendor's service department for a replacement label.
Safety precautions
•The expected life of the XG2000 is approximately five years, assuming use at an ambient temperature of 25°C.
•Use of this hardware guide, the XG2000, its firmware, and the management software are the responsibility of the user.
•Fujitsu and its partners accept no responsibility for any errors or data loss arising from use of the XG2000. Before using the XG2000, it should be understood that the XG2000 is not guaranteed against failure for any more than the original purchase price.
•Fujitsu and its partners do not approve of any use of the firmware provided with the XG2000, or of any authorized firmware upgrades, for any purpose other than installation on the XG2000. Modification and disassemble are not permitted at all.
•When connecting up the fiber optic cables, check that there is no dust, foreign objects or fingerprints on the connector surfaces.
For security
A default login password is set before the XG2000 is shipped. For security reasons, a new password should be chosen before the XG2000 is used.
For Safe Use of the XG2000
5