Peavey Q431FX Low Cut Led, Bypass LED, Equalizer Section, LED Level Meter, Power Switch

Page 4

LOW CUT (1)

Provides high pass filtering at 40 Hz in the “in” position. Low frequency roll off is at 12 dB per octave.

LOW CUT LED (2)

With the low cut switch in the “in” position, this LED will illuminate indicating a low frequency roll off at 12 dB per octave at 40 Hz.

BYPASS (3)

In bypass mode (switch in), the input signal is routed directly to the output and is unaffected by all front panel controls with the exception of the low cut filter.

BYPASS LED (4)

This LED will illuminate when the bypass switch is in the “in” position indicating that the EQ and gain controls are bypassed.

EQUALIZER SECTION (5)

31-bands of 1/3 octave filters. The filters are constant “Q” devices located at ISO center frequencies. Effec- tive equalization range is from 20 Hz to 20 kHz. Maximum cut per frequency is 18dB and the maximum boost per frequency is 12 dB.

AUTOMATIC FEEDBACK LOCATING LEDs (6)

When feedback occurs, the LED of the frequency band that is feeding back will illuminate over the slider that needs adjusting. The LED will remain illuminated for a few seconds even after the feedback is gone. This allows you to see where the feedback is if the feedback goes away before any correction is made. If there is no feedback occurring, all the LEDs will become active, acting as a basic real-time analyzer.

LED LEVEL METER (7)

This multicolored LED ladder indicates output level.

GAIN (8)

Calibrated control for regulating overall gain of an equalizer section. Unity gain throughout the signal chain may be maintained by recovering lost signal at this point. Example: Assume the equalization process has introduced a signal loss of -6dB by negative (-) adjustment of the EQ section. The gain should be adjusted to +6dB to maintain unity gain through the equalizer.

POWER SWITCH (9)

Used to turn AC mains power on or off.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Q431 F Page G L I S H Operation NotePower Switch LOW CUTLOW CUT LED BypassXLR Outputs Back Panel Features Line CORD-120V Products onlyXLR Inputs All specifications are typical unless otherwise noted Dimensions and WeightFrequency Response Distortion431FX Block Diagram P a Ñ O L Power Switch Interruptor de corriente LOW CUT Corte inferiorLOW CUT LED LED de corte inferior Bypass Derivación de pasoSalidas XLR Outputs SalidasEntradas XLR Inputs EntradasA N C a I S LOW CUT LED Signal DEL de coupure des basses frequences Bypass LED Signal DEL de dérivationPower Switch Interrupteur dalimentation LOW CUT Coupure des basses frequencesSortie XLR Inputs EntréesEntrée XLR Entrée JackU T S C H LOW CUT Tieftonverkürzung LOW CUT LED LED für die tieftonverkürzungBypass Überbrückung Bypass LED LED für die ÜberbrückungRückplatte Beschreibung DER Rückplatte Page From Quark Important Safety Instructions 80304532

Q431FX specifications

The Peavey Q431FX is an advanced audio mixer designed for professional sound applications, offering a blend of innovative technology and user-friendly features. As part of the Peavey family of products, the Q431FX is built with durability and reliability in mind, making it ideal for live sound, studio recordings, and various audio setups.

One of the standout features of the Q431FX is its comprehensive channel configuration. It comes equipped with multiple input channels, which provide a range of connectivity options including XLR and 1/4-inch TRS jacks. This versatility allows users to connect microphones, instruments, and other audio sources seamlessly. Each channel is equipped with a three-band EQ, enabling sound engineers to fine-tune individual audio streams for optimal sonic clarity.

The mixer also integrates a high-quality digital effects processor, boasting a plethora of effects such as reverb, delay, and chorus. These built-in effects not only enhance live performances but also simplify the setup process by eliminating the need for external effects units. The intuitive interface makes it easy to select and tweak effects settings, allowing for quick adjustments on the fly.

Another notable characteristic of the Q431FX is its robust monitoring capabilities. The mixer features a dedicated headphone output and control room outputs, making it simple for engineers to monitor mixes accurately. The inclusion of auxiliary sends provides additional flexibility for routing specific channel signals to external processing devices or monitors.

Furthermore, the Q431FX is designed with user convenience in mind. Its ergonomic layout includes clearly labeled controls, making it accessible even for those new to audio mixing. The build quality is exceptional, ensuring it can withstand the rigors of frequent gigging and heavy use.

The Peavey Q431FX also supports USB connectivity, allowing for easy integration with digital audio workstations (DAWs). This feature is particularly beneficial for recording applications, enabling users to record live performances or studio sessions directly to their computers.

In conclusion, the Peavey Q431FX is a powerful and versatile audio mixer that balances professional-level capabilities with user-friendly operation. Its combination of comprehensive connectivity options, integrated effects processing, and robust design makes it a valuable tool for sound engineers, musicians, and content creators alike. Whether it’s for live sound reinforcement or studio recording, the Q431FX delivers exceptional performance that meets the demands of modern audio production.
Top Page Image Contents