Black Box ServSwitch Wizard DVI/USB SRX, ACU5501A-R4 manual USB connections

Page 11

Chapter 3: Installation

3.2.1.2 USB connections

1Use the supplied USB cable to link the USB socket of the local module to a vacant USB socket on the computer as shown in Figure 3-5:

WER PO

	w
S
v	B
r
e
S

Figure 3-5. Attaching the USB link cable

[Dual-variant only] Optionally attach a second USB connection from the computer system using the supplied USB cable.

LOCA

Feeds the UPPER two USB sockets on the remote unit

IN

WER

PO

e S

Feeds the LOWER two USB sockets on the remote unit

Figure 3-6. Attaching two USB link cables to the dual-variant local module

724-746-5500 blackbox.com

Page 11

Image 11

Contents ServSwitch Wizard DVI/USB SRX Trademarks Used in this Manual ServSwitch Wizard DVI/USB SRXFCC and IC RFI Statements ServSwitch Wizard DVI/USB SRX Table of Contents Compatibility SpecificationsCable distance rules OverviewOverview Desk mount Installation Mounting the modules desk or rackRack mount InstallationConnections at the local module 3.2.1.1 Video connections ConnectionsUSB connections Link connections Audio connections dual-variants only Audio connections ACU5501A-R3 & -R4 onlyPower connections optional Connections at the remote module 3.2.2.1 Video connections Fed from the Upper socket On the local unit Link connections Speaker connections dual variants only Speaker connections ACU5501A-R3 & -R4 onlyOperation Power connectionsHdmi 1.3a operation Operation General useVideo display Edid information Remote module Power and activity indicatorsLocal module ServSwitch Wizard DVI/USB SRX Appendices Appendix B. Safety InformationAbout Black Box Black Box Tech Support FREE! Live /7